Page 5 of 5 FirstFirst ... 2345
Results 41 to 42 of 42
  1. #41

    Default Re: 3pt Finish Mower Durability?

    <font color=blue>...the capacity of the hog since its shipped dry.... Oil Brand would be nice too....</font color=blue>

    Rule of thumb... on any gearbox type device, have unit level, open fill plug... and fill until oil is even{with plug hole} or starts coming out the opening...

    First use the manual that came with the equipment, but most gearboxes will use 80/90 wt... marketing brand shouldn't matter on most consumable items, unless specifically mentioned by the manufacturer {which is extremely rare}

    If you notice most "fill plugs" are located about 75-85% near the top of the gearbox housing... the extra room is for expansion of oil that occurs during "work", with the oil under pressure, gets hot and expands... some of the gearboxes will have relief valves... without the relief valve or expansion room... the gearbox can break if overfilled... [img]/w3tcompact/icons/frown.gif[/img]

    You owe me a stick of gum for the $400. savings... [img]/w3tcompact/icons/laugh.gif[/img]





  2. #42

    Join Date
    Dec 2001
    Posts
    566
    Location
    Williamson, NY (near Rochester)
    Tractor
    JD 4300 MFWD

    Default Re: 3pt Finish Mower Durability?

    I didn't notice anyone mentioning the JD 272 rear finish mower. Is this thing any good? They threw one in with my 4300 purchase. I hope I didn't buy a turkey. [img]/w3tcompact/icons/smile.gif[/img]

Page 5 of 5 FirstFirst ... 2345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.