Best option for the 3rd function

   / Best option for the 3rd function #1  

aerojunkie

Silver Member
Joined
May 20, 2017
Messages
127
Location
Kannapolis, NC
Tractor
Mahindra 2538
Just looking for some opinions on the best way to add a 3rd function. I have a grapple on order from my dealer so now I need to get a 3rd function in place. Dealer wants $1200 for a true 3rd function installed but I know there has to be less expensive option. I am leaning towards the wr long kit that is sold by quite a few places on the net, any suggestions on the cheapest place? I saw this one referenced in another thread, appears to be the same wr long kit but without the hoses. If anyone has any suggestions, opinions, or know what hoses I need it would be greatly appreciated.

Construction Attachments Dedicated Third Function Hydraulic Valve Kit, Less Hoses, Up To 14 GPM
 
   / Best option for the 3rd function #2  
I purchased the wr long kit from everything attachments. I can say that the guys at wr long do a good job at supporting their product. I had quite a few questions when I got mine and their phone support was able to answer and guide me through the installation questions.
 
   / Best option for the 3rd function #3  
i got the grapple and 3rd function. used about 12 to 15 hours so far, real nice. single lid grapple. on 2555 hst. i have ripped out the ground 5 foot stumps about 4-5 inches diameter with just a bit of rocking and pull them out. i went for the single lid. about 300 cheaper and it forces me to grab heavy stuff in the center so i wont torque the loader.
 
   / Best option for the 3rd function #4  
I've heard good things about the W.R. Long kit & their support and I don't think you can go wrong with that option.
Everything Attachments sells the kit for about $800 I think, then you still have to install it.

You could also just build your own. (I mean half of the build process is the install which I assume you're going to do anyway) - Lots of folks have.

Here's the thread where I did mine, along with some other folks who posted their versions of it.
http://www.tractorbynet.com/forums/customization/358086-kioti-ck-35-3rd-function.html I had to re-do the write-up because of issues with Photobucket but the new version is in a PDF file on page 3.

I knew next to nothing about hydraulics when I started but with some great info & help from here along the way, I think it turned out ok.
 
   / Best option for the 3rd function #5  
For me, it did not make sense to pay that much money and only have one function. ...my plan was to use 2 other hydraulic setups for a top link and a side link. For about the same money, add a 3 spool valve and have remotes for other things. Just something to think about...
 
   / Best option for the 3rd function #6  
I installed a WR Long from Everything Attachments the other day. All the hoses were specific to my tractor and attachment and it came with a mounting plate for my tractor. Easy installation and it works well so far. Hardest part was running wire to power supply.
 
   / Best option for the 3rd function #7  
Brian (mtnviewranch) on here runs Fit Rite Hydraulics and also sells one. Not sure on the cost but I'm sure he'd be happy to discuss it with you. I've heard many good things from his customers on here over the years.


Aaron Z
 
   / Best option for the 3rd function
  • Thread Starter
#8  
Looks like the most poplular and respected is the WR Long kits. I have seen them a few places, but anyone have a best place/price on where to order one?
 
   / Best option for the 3rd function #9  
I've been using a WR Long electric over hydraulic for several years on my Kubota M8560 for my grapple and auger. Works great.
 

Attachments

  • IMG_0750.JPG
    IMG_0750.JPG
    601.3 KB · Views: 298
  • IMG_0746.JPG
    IMG_0746.JPG
    275.1 KB · Views: 328
  • IMG_0748.JPG
    IMG_0748.JPG
    265.7 KB · Views: 318
   / Best option for the 3rd function
  • Thread Starter
#10  
Does anyone here use the spring protector kit they have? I would like the quick connects hard mounted to the loader arm, figure they could be tucked out of the way better and less likely to snag when using something besides the grapple.
 
 
 
Top