Titan Attachments

[Navvet]

I have their toothbar and clamp on forks and I think they work great! Had to do a bit of grinding to get the toothbar to fit nice and snug, but that is probably because my bucket is "used" pretty well. Good pricing on their stuff and good delivery time, no complaints at all.

The more I look at their bolt on tooth bar i am thinking I will weld the tooth bar on.

My bucket is 3 years old and showing a dip in the center. If I weld the tooth bar, that should give the bucket more strength ....

 

[KYErik]

A few months ago, I bought a pair of their 48" pallet forks and I made my own frame for them to slide on. Quality seems very good. I haven't bent them yet!

 

[Code54]

I think the tomahawk 66" single lid like I got is only 415#. Dont really notice any difference when compared to the OEM HD bucket.

This is off the top of my head but I think the Kubota HD bucket is something like 400 or 450lbs. It is darn heavy - I think my grapple is around 700ish and I have no problems on my MX with it.

 

[goeduck]

Titan historically is a little hit and miss on fit and finish. But value and heavy duty have always been there in my opinion.

 

[kenmac]

I think the tomahawk 66" single lid like I got is only 415#. Dont really notice any difference when compared to the OEM HD bucket.

I didn't know there was an HD bucket. I believe the one I bought said something about Light or med. duty bucket. I knew I got taken. LOL

 

[kenmac]

This is off the top of my head but I think the Kubota HD bucket is something like 600 or 650lbs. It is darn heavy - I think my grapple is around 700ish and I have no problems on my MX with it.

Which grapple do you have ? I looked at the tomahawk. I just would prefer the dual cylinders like on the titan, or everything attachments 200# grapple

 

[goeduck]

Which EA model grapple is 200 lbs?

 

[kenmac]

Which EA model grapple is 200 lbs?

They say their 55 inch wicked root rake grapple is around 209 #

 

[Code54]

Which grapple do you have ? I looked at the tomahawk. I just would prefer the dual cylinders like on the titan, or everything attachments 200# grapple

Funny you ask - I am not really sure. Found it locally and it was unbranded but VERY solid! I only went with a 48" due to the weight but I do only have a single cylinder style. I know the tines are ½" and the main frame is heavier. Honestly it is over built for a tractor but I thought I may buy a skid steer someday and thought I would be able to use it on that also.

There is company called WildKat I bought a stump bucket from a good while back. They were reasonable and had decent quality for the price. Granted it was a bucket and sort of hard to screw that up but the welds were good and it held up good. Here is their website in case you are interested:
Grapples | MS Attachments

 

[Code54]

Just saw this on Craigslist and thought of your thread:
5' 2 Cylinder HD Grapple - farm & garden - by owner - sale