Plow size

   / Plow size #1  

Jonathan70

New member
Joined
Nov 29, 2016
Messages
22
Location
CT
Tractor
2538 CAB HST
How big a plow are you guys putting on the front of a tractor for snow removal ? Have a 2538 Mahindra ,,, looking @ a 7?6 used plow to adapt to my new Titan QA / 3 pt hitch set up for my FEL...
 
   / Plow size #2  
The highest percentage of people would use an 84" wide blade for a Mahindra 2538.
Travis
 
   / Plow size #3  
I have a 10' box pusher....5083E JD. I had as big as a 96" plow on a sub-frame mount for an L3400. I had some issues pushing that uphill with one set of chains and loaded rears.
 
   / Plow size #4  
I run a similar size tractor and adapted a 7' 6" truck plow to a QA plate and ran hyd. lines from one rear remote to the front for power angle. Also run a 7' blower on the back.
 
Last edited:
   / Plow size #5  
Plow angle at 45 degrees should clear rear tires least 6" so they say...start at 7'6".
 
   / Plow size
  • Thread Starter
#7  
Small world grew up in Torrington... there are more plow blades on Craig痴 list everyday ..
 
   / Plow size #8  
We go to Torrington when we go into "town".
 
   / Plow size #9  
I think you will be fine.

Just take smaller bites if necessary.

The issue is going to be pushing the tractor sideways. Running at full angle, and the plow a good ways ahead of the front axle....has alot of lateral leverage. But again, you can just take smaller bites.
 
   / Plow size #10  
How big a plow are you guys putting on the front of a tractor for snow removal ? Have a 2538 Mahindra ,,, looking @ a 7?6 used plow to adapt to my new Titan QA / 3 pt hitch set up for my FEL...

I use a 7'6" Diamond unit with my Titan 3PT QA on my LS XR4140 unit. Its more than capable. If I had the option again, use the same size plow.
IMG_9802.jpgIMG_9803.jpgIMG_9804.jpgIMG_9805.jpgIMG_9806.jpgIMG_9807.jpgIMG_9808.jpgIMG_9779.jpg
 
 
 
Top