Results 1 to 3 of 3
  1. #1
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,474
    Location
    SW Indiana
    Tractor
    Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST

    Default Quick-Attach adapter for 3 PH

    Is there such a thing as an adapter plate that lets you put, for example, a skid steer snowblade on the 3 PH of a tractor?

  2. #2
    Platinum Member EquipmentJunkie's Avatar
    Join Date
    Oct 2003
    Posts
    534
    Location
    SE PA
    Tractor
    Ford 1520

    Default Re: Quick-Attach adapter for 3 PH

    Yes, I believe that ATI Corporation, a TBN advertiser, does.

    Let me say this, if you are planning to use a snow blade on the rear you may not get enough down-force from the three-point. Since a three-point does not have down-force, just gravity, you may have difficulty keeping your plow from "riding up" over the snow on the ground.

    If it works, let us know.

  3. #3
    Veteran Member
    Join Date
    Jul 2003
    Posts
    1,474
    Location
    SW Indiana
    Tractor
    Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST

    Default Re: Quick-Attach adapter for 3 PH

    Thanks, EquipmentJunkie,

    Found it.

    John

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.