Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Veteran Member
    Join Date
    Jul 2004
    Posts
    1,445
    Location
    Hidalgo County, TEXAS

    Default PTO Powered Table Saw...

    I knew someone somewhere made one!
    This is to process firewood I guess.

    <font color="blue">POSCH Leibnitz </font>

  2. #2
    Veteran Member
    Join Date
    Feb 2005
    Posts
    1,467
    Location
    Olathe, Ks
    Tractor
    Yanmar 1602D

    Default Re: PTO Powered Table Saw...

    Only problem might be gettin it here from Europe! [img]/forums/images/graemlins/confused.gif[/img]

  3. #3
    Gold Member ZJ_HR's Avatar
    Join Date
    Oct 2003
    Posts
    412
    Location
    Croatia
    Tractor
    '02 Same Argon70 4WD, '81 Store 402 4WD

    Default Re: PTO Powered Table Saw...

    It's not a problem. Leibnitz is just 160km (100mi) far from me [img]/forums/images/graemlins/wink.gif[/img] [img]/forums/images/graemlins/cool.gif[/img] [img]/forums/images/graemlins/grin.gif[/img]

  4. #4
    Veteran Member
    Join Date
    Jul 2004
    Posts
    1,445
    Location
    Hidalgo County, TEXAS

    Default Re: PTO Powered Table Saw...

    Jagmandave,
    As I've said before, about stuff that's found overseas, depending on how you look at it, it's either a PITA or an opportunity.
    It could be an opportunity for someone perhaps to start an exclusive distributorship.

  5. #5
    Silver Member
    Join Date
    Jul 2003
    Posts
    234
    Location
    West Michigan
    Tractor
    Century 3045

    Default Re: PTO Powered Table Saw...

    I see these around here alot on auctions. they are called buzz-saws. People would cut the trees into poles and buzz them up into fire wood. Most were powered by belts from the tractor flywheel. On some tractors they had an attachment that had a flywheel that connected to the pto.
    I found that a chain saw worked faster and alot safer. The new modern chainsaws are lighter and faster than when they used buzz-saws.
    Alot of old farmers got hurt on those saws.
    Leaddog

  6. #6
    Platinum Member
    Join Date
    Oct 2002
    Posts
    912
    Location
    TR
    Tractor
    MH744

    Default Re: PTO Powered Table Saw...

    Do you not think wood chips of big size (by pto wood chippers) will not burn as good as cut woods (by a saw)? I think by mixing wood chips with coal particles will burn good. Not tried, but I believe so.

  7. #7
    Platinum Member
    Join Date
    Mar 2001
    Posts
    707
    Location
    Fairmont,WV
    Tractor
    New Holland Boomer2030

    Default Re: PTO Powered Table Saw...

    When I was around 5 years old I used to help my neighbor cut slabs from a sawmill with a table saw. It ran off a belt on the flywheel of an old tractor. Looking back now it wasn't the safest thing in the world. I've also seen planers that run the same way.
    Solo

  8. #8
    Gold Member
    Join Date
    Jul 2003
    Posts
    369
    Location
    In the middle of the palm of your right hand...wait, that doesn\'t sound good...
    Tractor
    4010 JD Cut, 4020 JD, shovels, rakes, and implements of destruction

    Default Re: PTO Powered Table Saw...

    "... it's either a PITA or an opportunity."

    Or perhaps it's an opportunity to be a PITA !

    I have a Dearborn buzz rig that fits mounts on the 3PH and runs off the PTO via belt that I used to use on my 2N Ford.

    Seems to me that finding one at an auction or implement dealer would be alot easier than shipping from Europe. Though maybe not as much fun [img]/forums/images/graemlins/grin.gif[/img]

  9. #9
    Platinum Member Pooh_Bear's Avatar
    Join Date
    Jan 2005
    Posts
    738
    Location
    Dunlap TN 25 miles north of Chattanooga
    Tractor
    Early 1949 Ford 8N

    Default Re: PTO Powered Table Saw...

    How about one of these.
    http://cgi.ebay.com/ws/eBayISAPI.dll...12529&amp;rd=1

    Current bid at 99 cents and it is in Newnan GA.

    Pooh Bear

  10. #10

    Join Date
    Jan 2005
    Posts
    247
    Location
    Maryland
    Tractor
    BX23

    Default Re: PTO Powered Table Saw...

    </font><font color="blue" class="small">( How about one of these.
    http://cgi.ebay.com/ws/eBayISAPI.dll...12529&amp;rd=1

    Current bid at 99 cents and it is in Newnan GA.

    Pooh Bear
    )</font>

    Hey now that is exactly the type saw I was thinking of. My gradfather had one a ran it with a big belt that ran fromn the saw to his Allis Chalmers "B" model

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.