I purchased a small dirt scoop that will not tilt low enough to scrape-up dirt when the scoop is turned facing the tractor. It works fine when turned backward, if I have a dirt pile to back it into.
The toplink I use on all my implements is about 22 inches long when screwed all the way in. Since it is too long, I wondered if there were shorter category 1 or 0 toplinks that I could purchase.
I could build a riser or extension above the toplink attachment holes on the scoop. It would probably need to be at least six inches above the present attachment holes and tilted backward to create enough space. However, I thought that it would likely break. I have a 25 horse power Mitsubishi, two-wheel drive.
Any advice?
The toplink I use on all my implements is about 22 inches long when screwed all the way in. Since it is too long, I wondered if there were shorter category 1 or 0 toplinks that I could purchase.
I could build a riser or extension above the toplink attachment holes on the scoop. It would probably need to be at least six inches above the present attachment holes and tilted backward to create enough space. However, I thought that it would likely break. I have a 25 horse power Mitsubishi, two-wheel drive.
Any advice?