Anonymous Poster
New member
- Joined
- Sep 27, 2005
- Messages
- 0
I need to know if a trencher can go deep enough to run a septic line? Will they work on a 2710, or do I need a 3010? Bob
trencher
- Thread starter Anonymous Poster
- Start date
OP
Anonymous Poster
New member
- Joined
- Sep 27, 2005
- Messages
- 0
from Bradco site...
612 Trencher
Key Features & Benefits
Category 1, 3-point mounting for 20-30 PTO HP hydrostatic tractors.
PTO shaft-driven with heavy duty slip clutch for overload protection.
Trencher drive is through gearbox with chain reduction to the headshaft giving it a more productive digging chain speed.
24" discharge auger places dirt well away from the trencher.
BRADCO Trenchers are covered by a one year limited warranty.
Shipped fully assembled, so you can be movin' dirt just minutes after you receive it.
Note: Front counter weight or leader may be necessary for proper transportation and operation of the tractor and trencher.
3-Point Mounting
Category 1
A Trench Depth 30"-60" (0.76-1.53m)
B Trench Width 6"-12" (152-305mm)
C Trenching Angle 65° maximum
612 Trencher
Key Features & Benefits
Category 1, 3-point mounting for 20-30 PTO HP hydrostatic tractors.
PTO shaft-driven with heavy duty slip clutch for overload protection.
Trencher drive is through gearbox with chain reduction to the headshaft giving it a more productive digging chain speed.
24" discharge auger places dirt well away from the trencher.
BRADCO Trenchers are covered by a one year limited warranty.
Shipped fully assembled, so you can be movin' dirt just minutes after you receive it.
Note: Front counter weight or leader may be necessary for proper transportation and operation of the tractor and trencher.
3-Point Mounting
Category 1
A Trench Depth 30"-60" (0.76-1.53m)
B Trench Width 6"-12" (152-305mm)
C Trenching Angle 65° maximum