Draw Bar

[Joe_W]

Has anyone set up a 3PH drawbar to tow with? I am considering mounting one of these to my 3PH, (the one that is a flat bar in the middle 3/4 with holes drilled across it, and round bars on the ends to slip into the 3PH), attaching a hitch ball to the middle and using it to tow a dump trailer with. My concern is that the drawbar will rotate back and forth as I start out and stop, wearing out or breaking the ball or the hitch on the trailer. I know that putting a regular reciever type hitch on the 3PH is a better idea, but I am looking to save afew bucks. I was wondering if this would work or not. Thanks for your replies.
Joe W.

 

[Anonymous Poster]

Joe,

We had this discussion through the "meat grinder".../w3tcompact/icons/wink.gif

Check out this past discussion for all the above...

Under carriage & 3-Pt Drawbar Hitch

And don't forget to order one of these drawbar lock bargains for $12...

 

[Knight9]

There are some very simple brackets that you can use to prevent the bar from rotating. Think they are pretty cheap. They have been discussed on here somewhere before....you may want to search to see if you can find the whole discussion.

For a photo of the drawbar lock kit you can check out this link.

Kevin

 

[Knight9]

John, apparently you are a faster typer than I am....or better at searching for old links!!! /w3tcompact/icons/wink.gif/w3tcompact/icons/smile.gif

Kevin

 

[Bird]

Joe, John Miller was a little faster than me, but look at http://www.ssbtractor.com/page36.html and http://www.tractorbynet.com/cgi-bin/compact/showflat.pl?Cat=&Board=nhown&Number=46324&page=&view=&sb=&vc=1

Bird

 

[Bird]

Whew, you guys are on the ball this morning. I just sent him to some of your information, Kevin./w3tcompact/icons/laugh.gif

Bird

 

[ronjhall]

Bird
Old age must setting in./w3tcompact/icons/frown.gif I don't even remember the tread./w3tcompact/icons/blush.gif I've been looking for brackets like that./w3tcompact/icons/smile.gif

 

[Anonymous Poster]

Kevin,

Probably just lucky... /w3tcompact/icons/smile.gif

Ask Glennmac, one day he asked for a "picture" of Big Bud... that took a few minutes.../w3tcompact/icons/blush.gif... then I gave him two! /w3tcompact/icons/wink.gif

I only wish I could get my work done around here that fast.../w3tcompact/icons/laugh.gif

 

[Bird]

Ron, don't feel bad; took me awhile to look it up. And probably the only reason I remembered it was because several years ago I didn't know about those locks or I would have bought one, but instead I made the contraption in the attached photo so I still use it.

Bird

 

[Anonymous Poster]

Very nice job Bird... /w3tcompact/icons/blush.gif