sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 5,826
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
Actually, I just got back online a few minutes ago. Decided to throw a computer online so I could look for a set of tires for my tractor. Seems both fronts are flat sitting in the driveway. I fixed one yesterday, and one the day before. Time for some new ones! I was on a borrowed connection before.
I think when I get around to building the 7 foot model, I will probably slot the boltholes that the blades mount in, and make some sort of retaining bolt to keep them from working loose (Stop adjustment) Won't be hard to do during build, but more of a pain with yours since it won't fit in my Bridgeport!
You might try adding a 3/8" or 1/2" piece of wood to the bottom of the two side runners, to lessen the bite until you get everything figured out. It might take more or less strip of wood to get the digging dept just right, but a strip of wood is easier to work with than a strip of metal. Drill a couple of bolt holes in the runner and counter sink the bolts in the wood. Use some old pallet oak, or something like that, that is harder than pine.
You have my number in case you need any help.
David from jax
I think when I get around to building the 7 foot model, I will probably slot the boltholes that the blades mount in, and make some sort of retaining bolt to keep them from working loose (Stop adjustment) Won't be hard to do during build, but more of a pain with yours since it won't fit in my Bridgeport!
You might try adding a 3/8" or 1/2" piece of wood to the bottom of the two side runners, to lessen the bite until you get everything figured out. It might take more or less strip of wood to get the digging dept just right, but a strip of wood is easier to work with than a strip of metal. Drill a couple of bolt holes in the runner and counter sink the bolts in the wood. Use some old pallet oak, or something like that, that is harder than pine.
You have my number in case you need any help.
David from jax