Results 1 to 6 of 6
  1. #1
    Veteran Member
    Join Date
    Jul 2002
    Posts
    1,171
    Location
    North of the Fingerlakes - NY
    Tractor
    Ford 4000; Ford 2000(both 3cyl.);JD40; 2004 Kubota L4300; 2006 Kubota B7610; new 2007 Kubota MX5000

    Default KK XB - Cat 0 hitch question

    Hi,
    The Northern Tool Catalog lists an XB Carryall frame that's sized for SubCut tractors. Looks like it would work well for carrying firewood on my B7610 if I built a wooden bed on it.

    However, the catalog states it is compatible with Cat 0 3 pt. hitch...as are the rest of the XB implements listed. Of course the B7610 is Cat 1 as is the BX series (which I thought the XB line was designed for). Will I need to replace the Cat 0 pins with Cat 1 and drill out the toplink hole, or do I stay with Cat 0 and use bushings? I don't recall seeing Cat 0 to Cat 1 bushings at TSC.

    Is anyone using XB implements on a B-series kubota or other Cat 1 CUT? Do they fit OK or are they strictly for smaller tractors? I like the looks of their 4' XB brush cutter and their XB tiller.

    Thanks.
    Bob
    New Kidz: '04 L4300 w/BH-90X, '06 B7610, '07 MX5000 Old Pros: '75 Ford 4000, '54 JD40

    Romans 8:28

  2. #2
    Member
    Join Date
    May 2006
    Posts
    25

    Default Re: KK XB - Cat 0 hitch question

    I have a KK XB subsoiler that I use behind my BX2350. I hooked it up right out of the box - no modifications were needed.

  3. #3
    Platinum Member
    Join Date
    Mar 2001
    Posts
    705
    Location
    Fairmont,WV
    Tractor
    New Holland Boomer2030

    Default Re: KK XB - Cat 0 hitch question

    I use a KK XB subsoiler on my TC18 with cat. 1 hitch. I didn't have to change or modify anything.

    Solo

  4. #4
    Silver Member
    Join Date
    May 2006
    Posts
    175
    Location
    Central, Mn
    Tractor
    JD 585

    Default Re: KK XB - Cat 0 hitch question

    It should fit both limited cat 1 and cat 0. I have the XB tiller and it will fit either one.

  5. #5
    Veteran Member Slamfire's Avatar
    Join Date
    Mar 2002
    Posts
    1,494
    Location
    Coker Creek, TN
    Tractor
    Mitsubishi D 1800

    Default Re: KK XB - Cat 0 hitch question

    Try one of the Yahoo groups on Power King garden tractors and the clones, Economy or Jim Dandy.
    '76 Mitsu D1800. '77 Wheel Horse A-100.
    Bold talk from a one eyed fat man



  6. #6
    Silver Member
    Join Date
    Jun 2005
    Posts
    138
    Location
    Saskatoon, SK, Canada
    Tractor
    John Deere 2210

    Default Re: KK XB - Cat 0 hitch question

    I have a kk subsoiler middle buster combo. It would not fit my 2210 out of the box. The width of my top link was too wide to fit the implement. I talked to KK about it and they said yes they sell the subsoilder with cat 1 pins but it's really a cat 0 implement. So it may or may not fit your tractor out of the box. The modification to make the subsoiler/MB work was minor it just took a few minutes with a torch and a welder.
    John Deere 2210, 54"mmm, FEL, 60" Farm King rear blade, 48" Farm King Tiller, 48" Farm King rear blower, 48 Farm King box blade, 3 PT 25 gallon sprayer and KK XB sub soiler/ middle buster modded for my Imatch and plowing pipe.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.