Results 1 to 2 of 2
  1. #1
    Super Star Member
    Join Date
    Aug 2001
    Posts
    12,819
    Location
    Upper Midwest USA
    Tractor
    JD_4x2_Gator, JD_4300, JD_X485, JD_425, JD_455, JD_110

    Default JDx13 Rotary Cutter upgrade

    This is a post for Ron of ronjhall. I have been thinking about his request for a pic of the square tubing I had welded to the rear of the deck, and finally took the time to shoot it this morning (new years resolution) and will post it now. I found the deck of my JD513 to be vulnerable to bending when backing up and plowing dirt. I had a local welding shop pound it back straight, and weld a 1 1/2" square tube onto the lower lip. It works great. The rest of the machine functions very well. I left the skiff of snow on it to try to show it better. Holler if you have any questions. Ron, sorry to take so long. I finally located your request which was on the 9th of Sept, '01. I added a big room to the house this fall and didn't find time to take the pictures.
    Attached Images Attached Images

  2. #2
    Super Member ronjhall's Avatar
    Join Date
    Apr 2000
    Posts
    7,734
    Location
    SE Michigan, AZ when its cold in MI.
    Tractor
    Kubota 2910 HST

    Default Re: JDx13 Rotary Cutter upgrade

    beenthere
    Thanks for the photo and reminder to look at your post. I plan on adding some type of reinforcements to mine before summer. The tubing may the best way to go.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.