Results 1 to 3 of 3
  1. #1
    Veteran Member deerefan's Avatar
    Join Date
    Aug 2005
    Posts
    1,474
    Location
    louisiana
    Tractor
    1952 8N, 2005 JD 5103

    Default 97 honda 300 4x4 starter question

    I purchased a reman starter for my 97 honda 300 4x4 to replace the old starter that had locked up. I installed the new starter last night and all it will do is spin the gears and flywheel but will not engage the motor. The starting clutch was working fine before the switch. The bike will also run fine when kick started. Is it possible the starter is spinning in the wrong direction? The fellow I bought it from said a starter can be built to spin clockwise or counter clockwise. Any help would be greatly appreciated!!!

  2. #2
    Veteran Member TOMMYHPX4X4's Avatar
    Join Date
    May 2005
    Posts
    1,956
    Location
    schriever, louisiana terrebonne parrish
    Tractor
    gator hpx 4x4

    Default Re: 97 honda 300 4x4 starter question

    just reverse the wires and see what happens.
    This ignore feature is great it's like raid is on pest one click and the pest is gone

  3. #3
    Veteran Member deerefan's Avatar
    Join Date
    Aug 2005
    Posts
    1,474
    Location
    louisiana
    Tractor
    1952 8N, 2005 JD 5103

    Default Re: 97 honda 300 4x4 starter question

    problem solved he sold me the wrong starter...my 4 wheeler requires a counter clockwise spinning starter b/c the starter clutch engages the flywheel when the flywheel spins clockwise only

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.