DIXIEDOG
Platinum Member
- Joined
- May 10, 2009
- Messages
- 828
- Location
- Maine
- Tractor
- International 2544 / Gator 825i/L2501/General
I went ahead and installed my LED strobe light kit with 3M Red Double sided tape.
Here's a quick video of the lights in action (Just click the pic to start the video)
Here's a few pics of the lights installed
Front view
Front light from the inside of the buggy
Side light using "O- clamps"
Controller and front lights
Back lights from inside of buggy
It was a quick and easy install that should really increase the visibility when I'm plowing with the buggy this winter, being LED they have very little power draw and no permanent changes or splices to wiring were made to the buggy. :thumbsup:
Here's a quick video of the lights in action (Just click the pic to start the video)
Here's a few pics of the lights installed
Front view
Front light from the inside of the buggy
Side light using "O- clamps"
Controller and front lights
Back lights from inside of buggy
It was a quick and easy install that should really increase the visibility when I'm plowing with the buggy this winter, being LED they have very little power draw and no permanent changes or splices to wiring were made to the buggy. :thumbsup: