Results 1 to 10 of 10
  1. #1
    Gold Member
    Join Date
    Nov 2009
    Posts
    328

    Default Kawasaki Mule 2510 4x4

    I just got a used 2510 4x4. Anything special to watch for, service etc. I also need to get a service/repair/parts manual. Anyplace special to get those from? Thanks

  2. #2
    Silver Member beretta96man's Avatar
    Join Date
    Nov 2010
    Posts
    109
    Location
    North Shore, MN
    Tractor
    RTV 500 with camoplast 4s utv tracks, Bobcat 773 with filled tires and steel tracks

    Default Re: Kawasaki Mule 2510 4x4

    Quote Originally Posted by yanmars View Post
    I just got a used 2510 4x4. Anything special to watch for, service etc. I also need to get a service/repair/parts manual. Anyplace special to get those from? Thanks
    Other then your local dealer, try e-bay. I buy a lot of manuals on there but understand most that are really cheap are just copies off someone's computer. Never bothered me as the info is the same.

    Otherwise Google search for manuals. Here is one source, good luck!
    ATV Products
    2001 Bobcat 773
    2010 RTV 500 with Camoplast 4s tracks

    ____________________________________
    Boss skid steer V plow - T200 Teleboom - Waco root grapple - Bobcat snow blower - Snow bucket, steel tracks, forks and custom made work platform

  3. #3
    Gold Member
    Join Date
    Nov 2009
    Posts
    328

    Default Re: Kawasaki Mule 2510 4x4

    thanks.

  4. #4
    Bronze Member
    Join Date
    Oct 2002
    Posts
    54
    Location
    Southeastern Pa
    Tractor
    2007 Kubota B7800, 2011 Kubota RTV 900XT, 2005 Kubota. BX1500

    Default Re: Kawasaki Mule 2510 4x4

    Just gave my 2510 away to a friend and it was great while i had it. It was a 1994 2wd with a cab and heater.

    I wanted to buy another one but they are priced too close to the rtv900. I went with the kubota 900xt. I switched because I needed 4wd, and wanted diesel. The mule was tough to start in the cold (no efi) but other than that, it was a durable machine that i would buy again if the price was right.
    Ike

    2007 Kubota B7800, 402 Loader, Woods BH75 w/thumb, Canopy, Seat
    2005 Kubota BX1500, 54" deck, loader
    2013 Honda Rubicon
    1995 Wheelhorse 314-H
    2006 Wheelhorse Classic 315-8

  5. #5
    Silver Member
    Join Date
    Oct 2008
    Posts
    119

    Default Re: Kawasaki Mule 2510 4x4

    I have a 1999 2510 4x4. It has been a good machine. I check the engine oil a lot and smell the oil for gas. The carb has no adjustment. The crankcase vents to the air filter so don't overfill the crankcase or oil will get on the air filter and cause it to run rich. Ours has been tough to start on cold mornings but once it warms up it runs fine.

  6. #6
    Bronze Member
    Join Date
    May 2009
    Posts
    62
    Location
    Evart, Michigan
    Tractor
    2012 L4600

    Default Re: Kawasaki Mule 2510 4x4

    I have 1997 2510. Bullet proof reliable. Don't overfill the oil!!!!
    2012 RTV900XT Camo
    2006 ZD28 Zero Turn
    2012 L4600 w/FEL
    2010 Gold Wing/ABS


    Democrats-Spreading your wealth since 1932

  7. #7
    Bronze Member SandyTX's Avatar
    Join Date
    Dec 2009
    Posts
    64
    Location
    CenTX (Bell Co.)
    Tractor
    JD 4300

    Default Re: Kawasaki Mule 2510 4x4

    I have a 94 2500 2wd gas model. Picked it up a few years ago for a good price. The only issue I had was a little water in the oil. Turned out the heads needed a little smoothing and a new head gasket. Great little machine that gets used a few times week as a glorified wheel barrel. PM me if you still looking for a service book.
    JD 4300 with 430 Loader and Canopy
    JD Rotary Cutter 503
    JD 261 Grooming Mower
    Generic 6ft Disc
    5 Ft Chisel Plow

  8. #8
    Gold Member
    Join Date
    Nov 2009
    Posts
    328

    Default Re: Kawasaki Mule 2510 4x4

    I got a manual off the net, thanks for the offer. I just saw a 2510 sell for parts for about $550 but it looked like it needed tires, the engine was shot and it may have been two wheel drive.
    The engine in mine has not been looked at yet, it runs but badly.

  9. #9
    Silver Member
    Join Date
    Oct 2008
    Posts
    119

    Default Re: Kawasaki Mule 2510 4x4

    I would look at the spark plugs first. You can remove the fuel bowl under the carb to see if there is trash or water there. I think that there is a fuel filter somewhere or it is a good idea to put one inline. We only put nonethanol gas in our machine. Our air filter got saturated with oil somehow and engine ran very rich which is not good. Check the valve adjustment. While the plugs are out check compression or do a leak down test.

  10. #10
    Gold Member
    Join Date
    Nov 2009
    Posts
    328

    Default Re: Kawasaki Mule 2510 4x4

    It appears it may have been overrevved and/or a valve stuck briefly I am told as the push rod was out of postion. It was put back in place and all is well I have been informed.

Similar Threads

  1. Kawasaki Mule 610 vs. Kubota RTV 500 - 2011
    By CentralNC in forum ATVs & Utility Vehicles
    Replies: 28
    Last Post: 06-04-2011, 04:07 AM
  2. Mule 2510 Axle Bearing Replacement
    By Riddler in forum ATVs & Utility Vehicles
    Replies: 0
    Last Post: 11-02-2010, 02:25 PM
  3. Mule 2510 diesel
    By viking in forum ATVs & Utility Vehicles
    Replies: 0
    Last Post: 07-01-2006, 11:44 PM
  4. Kawasaki Mule Question
    By LarryT in forum Rural Living
    Replies: 6
    Last Post: 03-27-2001, 07:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.