mark777
Veteran Member
- Joined
- May 16, 2004
- Messages
- 1,288
- Location
- S.E Texas
- Tractor
- Ym1300d-1401D-1601D , 1610D & Massey Ferguson 1020
Gentleman,
I'm going to copy an urgent request from one of our soldiers at the front line in Afghanistan! I will include his email at end.
Posted by: GunSlngr201
Original Content:
Quote:
Gentlemen,
I am currently deployed forward (very forward) in Afghanistan. The team got on site three days ago and part of our package is a C330 Bobcat to help build our fortifications. First day it operated fine, however once it was shut down yesterday it wouldn't start again.
The only fault error we are getting is disconnected air filter (M0116) which has been replaced and air flow sensor is intact. We have a general mechanic on site to help, but this is a little out of his league. We've torn the air preheater apart, cleaned it out and reattached it. I get a glowplug preheat signal while I'm trying to spin it up, but there's no turn over. We've opened the water drain **** to see if it's getting fuel, and it drains.
I've ordered a new set of glow plugs, but am still trying to locate where they are on the engine to pull and check them over. I'm leaning towards fuel pump or glow plugs or fuel cut off selenoid, but have no diagnostic equipment to confirm what the malfunction is.
Bottom line, guys, if we don't get this thing running, our bottoms are hanging out in the open since we can't fill our barriers in with dirt. If anyone has any ideas about where we should be looking or going next, please email me. Thanks.
gunslngr201@gmail.com
Thank you all for reading and willing to help.
Mark & MTF Staff
I'm going to copy an urgent request from one of our soldiers at the front line in Afghanistan! I will include his email at end.
Posted by: GunSlngr201
Original Content:
Quote:
Gentlemen,
I am currently deployed forward (very forward) in Afghanistan. The team got on site three days ago and part of our package is a C330 Bobcat to help build our fortifications. First day it operated fine, however once it was shut down yesterday it wouldn't start again.
The only fault error we are getting is disconnected air filter (M0116) which has been replaced and air flow sensor is intact. We have a general mechanic on site to help, but this is a little out of his league. We've torn the air preheater apart, cleaned it out and reattached it. I get a glowplug preheat signal while I'm trying to spin it up, but there's no turn over. We've opened the water drain **** to see if it's getting fuel, and it drains.
I've ordered a new set of glow plugs, but am still trying to locate where they are on the engine to pull and check them over. I'm leaning towards fuel pump or glow plugs or fuel cut off selenoid, but have no diagnostic equipment to confirm what the malfunction is.
Bottom line, guys, if we don't get this thing running, our bottoms are hanging out in the open since we can't fill our barriers in with dirt. If anyone has any ideas about where we should be looking or going next, please email me. Thanks.
gunslngr201@gmail.com
Thank you all for reading and willing to help.
Mark & MTF Staff