Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Dec 2012
    Posts
    2
    Location
    pickering ont
    Tractor
    bobcat skid steer

    Default stump grinder trouble

    I have a sg60 stumpgrinder that the solinoids do not work on the unit.Got power and ground on the power cable going into the curcuit board on the grinder.
    Anyone had this problem?

  2. #2
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,170
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: stump grinder trouble

    What model & year machine do you have it on? Has it worked on this machine before or is this the 1st time hooking it up?
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  3. #3
    New Member
    Join Date
    Dec 2012
    Posts
    2
    Location
    pickering ont
    Tractor
    bobcat skid steer

    Default Re: stump grinder trouble

    Modle # is SG 60, YEAR IS 2008 ? The unit will not work on my other bobcat as well. Thanks for any help you may give.
    Wayne / in pickering -ont. canada

  4. #4
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,170
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: stump grinder trouble

    With everthing turned on and working correctly there should be (2) 12 volt supplies to the module. The red w/white stripe wire to pin #2 in in the connection plug on machine is unswitched power. The orange wire to pin #1 is switched power, to test - turn key on (do ont start), push Auxiliary button in left panel twice (max flow light comes on) and click the front trigger on Right hand steer lever once. If there is no power to the orange wire at the connection plug you need to trouble shoot the loader. If you have power at both wires to control module and ground is good back through the black wire and nothing works with machine running, I would gues it is a bad module. The 4 purple wires are computer communication wires only.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

Similar Threads

  1. Stump Grinder
    By sodbuster3359 in forum Attachments
    Replies: 2
    Last Post: 05-17-2011, 03:10 AM
  2. Stump Grinder
    By Toffy in forum Build-It Yourself
    Replies: 7
    Last Post: 03-26-2010, 10:12 AM
  3. Stump Grinder
    By poli33 in forum All Other Brands
    Replies: 1
    Last Post: 04-17-2009, 10:44 PM
  4. 3 pt stump grinder or any stump grinder
    By kossetx in forum Attachments
    Replies: 1
    Last Post: 08-27-2006, 11:06 PM
  5. Stump grinder
    By murph372 in forum Attachments
    Replies: 1
    Last Post: 09-19-2004, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.