Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Mar 2013
    7753 bob cat

    Default howard

    how do i change a fan belt on a 7753 bob cat

  2. #2
    Elite Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Cumberland Plateau, TN
    Bobcat CT225

    Default Re: howard

    The fan blet runs off the hydrostatic pump pulley to the fand drive gear box. It has a spring loaded idler. Raise the cab to get access, then pull the idler/tension pully towards you to loosen belt. Slip the belt off both pump and gear box pulleys. Take the bolt out of the idler pulley to get blet out from under the retainer guide to replace it. Also replace the bushing inside that pulley while you're in there.

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

Similar Threads

  1. Tiller Howard tillers? Is Howard out of Biz?
    By DaddyRabbit in forum Attachments
    Replies: 6
    Last Post: 05-28-2012, 06:25 PM
  2. Howard HN rototiller
    By Tim Hogan in forum Parts/Repairs
    Replies: 2
    Last Post: 02-07-2012, 12:50 PM
  3. Tiller Howard HR-4
    By Neil L in forum Attachments
    Replies: 2
    Last Post: 03-25-2011, 10:13 AM
  4. Tiller Howard Tillers
    By bigballer in forum Attachments
    Replies: 3
    Last Post: 08-09-2006, 01:58 PM
  5. Tiller Howard Tillers
    By JEA in forum Attachments
    Replies: 3
    Last Post: 03-12-2004, 11:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.