Hi folks, new guy here. I have a 2002 Bobcat b250 and am having a fuel problem. I have traced it down to no power to the fuel pump. If I run a 12 v jumper from the battery things work great. All the fuses tested good. I can not find a manuel or wiring diagram. All the wiring is red with yellow plastic numbered collars on the ends so I can't trace the wires source. I need to know if I run a new separate wire will I need 12 v to the pump all the time or just during cranking/starting? Also, if I run a separate wire to the pump, what size fuse do I use? Thanks in advance.
John
John