Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    May 2013
    Posts
    3
    Location
    Chico, Ca
    Tractor
    Bobcat b250

    Default Bobcat b250 fuel pump question.

    Hi folks, new guy here. I have a 2002 Bobcat b250 and am having a fuel problem. I have traced it down to no power to the fuel pump. If I run a 12 v jumper from the battery things work great. All the fuses tested good. I can not find a manuel or wiring diagram. All the wiring is red with yellow plastic numbered collars on the ends so I can't trace the wires source. I need to know if I run a new separate wire will I need 12 v to the pump all the time or just during cranking/starting? Also, if I run a separate wire to the pump, what size fuse do I use? Thanks in advance.

    John

  2. #2
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    1,911
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: Bobcat b250 fuel pump question.

    Power to the fuel pump should be wire with collar number 31, goes to 10 amp fuse and wire should have same collar number at the fuse end. Power needs to be supplied all the time with key in run and/or start position.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  3. #3
    New Member
    Join Date
    May 2013
    Posts
    3
    Location
    Chico, Ca
    Tractor
    Bobcat b250

    Default Re: Bobcat b250 fuel pump question.

    Thank you for this information. I removed the seat and was able to trace the wire from pump to fuse block. The problem was that there was no fuse. I had already changed out the fuel pump so I put in a fuse 5 amp for that replacement pump) and the problem was solved. I tore down the old pump and found a small splinter of wood keeping the check valve open. I have no idea why the previous owner (owners) removed the fuse. By the way, my manual doesn't show anything about this fuse or even mention a fuel pump. Any sugestions on were to get a decent manual? Thanks again for taking time to help out, I love this little hoe!

    NUTZ

  4. #4
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    1,911
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: Bobcat b250 fuel pump question.

    No idea on a manual, but do yourself a favor and install an inline fuel filter between tank and the fuel pump.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  5. #5
    New Member
    Join Date
    May 2013
    Posts
    3
    Location
    Chico, Ca
    Tractor
    Bobcat b250

    Default Re: Bobcat b250 fuel pump question.

    Replacement pump (NAPA) came with one. Thanks again.

Similar Threads

  1. Backhoe bobcat B250
    By robert w white in forum Owning/Operating
    Replies: 8
    Last Post: 03-30-2014, 04:02 PM
  2. Please help Bobcat B250 problem
    By Orangelandscaping in forum Bobcat Tractors
    Replies: 1
    Last Post: 01-26-2013, 12:54 PM
  3. Bobcat B250 problem PLEASE HELP
    By Orangelandscaping in forum Bobcat Construction Equipment
    Replies: 7
    Last Post: 12-17-2012, 08:40 PM
  4. Bobcat b250 questions...
    By atscogin in forum Bobcat Tractors
    Replies: 2
    Last Post: 10-04-2009, 09:44 PM
  5. Bobcat B200/B250
    By tuco in forum Buying/Pricing/Comparisons
    Replies: 1
    Last Post: 12-01-2002, 01:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.