Results 1 to 2 of 2
08-02-2013, 08:05 AM #1
- Join Date
- Aug 2013
Anyone no what the a770 should b at idle? Is 1300 rpm right? The a300 is around 1090-1120. That's a big difference. And way easier to handle as operator.
08-04-2013, 10:54 AM #2
1300 RPM is right in middle of specification. Engine in 770 is same engine that was used in S330. Timing and fuel delivery are different than the 300 to gain extra HP. EPA has an emission standard for low RPM (idle) as well as @ full power, so I think this is why the idle speed is higher. S330 had same idle RPM spec.Dennis
CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.
By KuboB1200 in forum Kubota Owning/OperatingReplies: 7Last Post: 09-16-2010, 10:00 PM
By Reaney in NH in forum Chinese TractorsReplies: 7Last Post: 08-11-2007, 11:31 PM
By HGM in forum General Lawn & GardenReplies: 3Last Post: 05-30-2006, 07:31 PM
By mike48 in forum YanmarReplies: 18Last Post: 01-11-2006, 04:13 PM
By Thomas in forum Related TopicsReplies: 2Last Post: 04-27-2000, 01:36 PM