Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    Nov 2017
    Posts
    8
    Location
    Ocala
    Tractor
    Bobcat 610

    Default I need your ideas on a Bobcat 642 Steam cleaning question

    Greetings again Folks,
    A number of you folks have been kind enough to help me out with drive chain questions on a recently aquired Bobcat 642. The info has been great and I have been doing some
    repairs to other parts of the machine. Today I brought the 642 in the shop, propped the boom, raised the cab and found 100 years of leaves, branches,
    oil, grease and the bones of a Tyronasourus Rex lodged under the cab. I prodded around hopping to find and opening through which I could push, break up and use my air hose to blow away the debris. That did not go well either. I tried to crawl under it to see if there were any openings, but I don't fit under it very well. Now, I know you guys don't let this trash build up to be six inches think like I have but I am left with the question of how the heck do I get this piece steam cleaned without getting my self steam blasted also. I have power washed and steamed a machine or two over the years but have learned that if there is no ware for the steam and waster to escape it comes back at me, or worse floods parts of the machine what were never designed to be under water. Your ideas would be very much appreciated.
    Have fun,
    buckshot
    Last edited by ibbuckshot; 01-09-2018 at 10:53 PM. Reason: clearification

  2. #2
    New Member
    Join Date
    Dec 2017
    Posts
    19
    Location
    Sofia
    Tractor
    Bobcat

    Default Re: I need your ideas on a Bobcat 642 Steam cleaning question

    I don't know if this machine has controlers . It is not good to wet electrical components. You have to be sure the covers for chaincase are tightly closed . I think somewhere on the chassis there is a hatch-gate .
    Goodluck!!

  3. #3
    Veteran Member flyerdan's Avatar
    Join Date
    Aug 2011
    Posts
    1,176
    Location
    Salem, OR
    Tractor
    Hyster H50 Bobcat M700

    Default Re: I need your ideas on a Bobcat 642 Steam cleaning question

    If it's like my 700, you have to change the hydraulic filter from underneath, so there is ample area to flush out debris. If you don't have an access panel on the bottom, you might have to prop the front up with the bucket and wand it out from the front through the back door.
    I hear you on the unpleasantness of cleaning blow back, I have an air nozzle with a long piece of fuel line with a slight bend at the tip so I can stay out of range, and I prefer the HF engine cleaning gun whenever possible. Sometimes though you just have to use a straight wand pressure washer and stand aside as best as you can.
    Whoever said that you can't fight city hall had obviously never met Marvin Heemeyer.

  4. #4
    Elite Member Industrial Toys's Avatar
    Join Date
    Feb 2008
    Posts
    4,129
    Location
    Ontario Canada
    Tractor
    Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator

    Default Re: I need your ideas on a Bobcat 642 Steam cleaning question

    I feel your pain. It's one of the reasons I got rid of my Argo 8WD Diesel Amphibious ATV. No good way to clean the stuff you mentioned out of the belly pan.

    I have a steam genny, but have not used it in years. I had the lance sitting on something, it shifted and I got steamed on the shoulder wearing only a T-shirt. Instant, no-skin!

  5. #5
    Elite Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,509
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: I need your ideas on a Bobcat 642 Steam cleaning question

    Look on the very front right and left corners of the chain case frame see if there are removable covers there. If so remove those covers then with front slopping down hill you can work the debris out the front. Can also remove the center side access covers that cover the motors and work some of that out the side. And raising the front wheels off the ground and pushing the stuff out around the engine out the back door.
    With a really bad build up as described it will probably take all 3 of these options, positions to get majority of it out.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

Similar Threads

  1. Help with Bobcat 642 drive chain replacement
    By ibbuckshot in forum Bobcat Construction Equipment
    Replies: 16
    Last Post: 12-18-2017, 04:42 PM
  2. Replies: 32
    Last Post: 08-15-2016, 08:16 AM
  3. Any ideas for cleaning out a rusty gas can?????
    By 94BULLITT in forum Oil, Fuel & Lubricants
    Replies: 22
    Last Post: 12-03-2013, 10:08 PM
  4. IH 642 4X16 rollover plow manual needed
    By SSweet9c1 in forum Attachments
    Replies: 0
    Last Post: 04-20-2013, 09:27 AM
  5. Replies: 7
    Last Post: 11-13-2011, 10:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.