Re: CT230 First Troubles

**gumshu** · 05-21-2012, 05:18 PM

Originally Posted by Canada_CT230

Couldn't tell you for sure...don't have parts manual. Educated guess is yes...since the CT225/230/235 share the same frame size.

In the courtroom I will deny ever knowing you and deny giving any advice.

I am not the eBay seller. I just remember seeing it a while ago while searching "Bobcat" on eBay.

Ha ha... ok. It looks exactly like the one I have on my tractor. Just curious. I haven't had a leak, but I may buy one just in case.

**SSdoxie** · 05-21-2012, 07:32 PM

Originally Posted by Grand_Pooba

The bad oil cooler thread lives on....My tractor is from the same spring of 09 as most of the others with this problem. I've about 150 hrs on mine and I just noticed that the cooler is all "wet" and stuck full of dandalion puff. My local dealer quoted me $259 and he said his catalog said I would need new hoses too but he wasn't sure that was true. Did anyone have to replace hoses? Thanks

Yes, you do need new hoses to install the new cooler. Not only is it built for better durabilty it is larger for increase cooling capacity. Have your dealer contact the BC rep, I would be supprised if he didn't approve for fair share of parts cost if not full cost of parts.

gumshu, Same cooler fits all 200 model Bobcat and Kioti CK25, 27, 30, & 35.

You could buy that $50 cooler on ebay and hope it doesn't start leaking in next 150 hrs. or have the new style put on and have some piece of mind. Easier for me to say because mine has the updated cooler on it.

**lilranch2001** · 05-22-2012, 06:24 AM

Originally Posted by SSdoxie

Yes, you do need new hoses to install the new cooler. Not only is it built for better durabilty it is larger for increase cooling capacity. Have your dealer contact the BC rep, I would be supprised if he didn't approve for fair share of parts cost if not full cost of parts.

gumshu, Same cooler fits all 200 model Bobcat and Kioti CK25, 27, 30, & 35.

You could buy that $50 cooler on ebay and hope it doesn't start leaking in next 150 hrs. or have the new style put on and have some piece of mind. Easier for me to say because mine has the updated cooler on it.

Agreed

**gumshu** · 05-22-2012, 10:37 AM

Thanks guys. The newer cooler sounds like the way to go.

**Grand_Pooba** · 05-22-2012, 11:36 AM

New cooler is the way to go. Several people have done it with existing hoses so I'll try that first.

**Grand_Pooba** · 05-27-2012, 09:03 PM

New cooler installed. Wow was that easy, expensive, but easy. Hope this one holds up a long time. I took the battery out for better access and I notice a lot of corrosion from the battery. That will need to be sanded down and re painted. Didn't have time today.

**lilranch2001** · 05-27-2012, 09:07 PM

Originally Posted by Grand_Pooba

New cooler installed. Wow was that easy, expensive, but easy. Hope this one holds up a long time. I took the battery out for better access and I notice a lot of corrosion from the battery. That will need to be sanded down and re painted. Didn't have time today.

SO YOU WERE ABLE TO RE USE THE HOSES?

**Grand_Pooba** · 05-29-2012, 06:26 AM

Originally Posted by lilranch2001

SO YOU WERE ABLE TO RE USE THE HOSES?

Existing hoses lined right up. I mowed with it for a few hours after the install and no signs of leaks.

**lilranch2001** · 05-29-2012, 07:14 AM

Originally Posted by Grand_Pooba

Existing hoses lined right up. I mowed with it for a few hours after the install and no signs of leaks.

cool beans!

**leeautoboat** · 09-18-2012, 08:20 AM

yes, to reach the taller cooler that is twice as large as OE

Thread Tools

Display