Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 45
  1. #21
    Super Member 94BULLITT's Avatar
    Join Date
    Feb 2011
    Posts
    8,314
    Location
    Frederick County, VA
    Tractor
    Kubota BX2360 & L4240 HSTC

    Default Re: Lazy Hydro Pedal

    My pedal was sticking and it was the return spring, all of the 200 series have this problem. My tractor started doing it at 50 hours.

  2. #22
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,382
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: Lazy Hydro Pedal

    Dealer sent me a new Dampner/Return cylinder today to try out. It has more return force but also takes more foot pressure so I will, hopefully, get it on this weekend and try it. See if I would rather have more more foot pressure or slower return. My current one works OK if at 2000 RPM or more.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  3. #23
    Gold Member
    Join Date
    Dec 2006
    Posts
    390
    Location
    Sullivan, WI
    Tractor
    2011 Bobcat CT235

    Default Re: Lazy Hydro Pedal

    cylinder replaced on my Ct235, problem solved
    Attached Files Attached Files

  4. #24
    Elite Member
    Join Date
    Nov 2009
    Posts
    3,700
    Location
    Indiana
    Tractor
    Bobcat

    Default Re: Lazy Hydro Pedal

    Quote Originally Posted by qed-cat225 View Post
    cylinder replaced on my Ct235, problem solved
    thanks, I am gonna try to make sure if mine is bad or not this weekend

  5. #25
    Veteran Member kiotiken's Avatar
    Join Date
    Aug 2011
    Posts
    2,494
    Location
    Dunrobin, Ont
    Tractor
    2012 Kioti DK45 HST Cab

    Default Re: Lazy Hydro Pedal

    I had the same problem on my CK 30. Here's a link to my thread and what was done to fix it. The short version of the story is they replaced the HST, now it's fine. I just past 105 hrs and it's still holding, although I don't think the last one started until about 40 hrs and I've only put 35 hrs on since it was done.

    http://www.tractorbynet.com/forums/k...w-ck-30-a.html

  6. #26
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,382
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: Lazy Hydro Pedal

    Just got around to install my new dampner on the control pedal today. It makes a big difference. Now even at lower RPM pedal comes back nice an solid.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

  7. #27
    Super Member 94BULLITT's Avatar
    Join Date
    Feb 2011
    Posts
    8,314
    Location
    Frederick County, VA
    Tractor
    Kubota BX2360 & L4240 HSTC

    Default Re: Lazy Hydro Pedal

    I was wondering how the new pedal damper was working on every ones tractor. My tractor is on the 3rd damper now and it started doing it after a couple hours of use on the last damper. So did the damper resolve your problem? I read that thing from the bobcat call trac (my dealer sent me the same thing in a email) and saw it says use your foot or brake but in a tight area that is not good if the pedal stays stuck.

  8. #28
    Elite Member
    Join Date
    Nov 2009
    Posts
    3,700
    Location
    Indiana
    Tractor
    Bobcat

    Default Re: Lazy Hydro Pedal

    Quote Originally Posted by 94BULLITT View Post
    I was wondering how the new return spring was working on every ones tractor. My tractor is on the 3rd spring now and it started doing it after a couple hours of use on the last spring. So did the spring resolve your problem? I read that thing from the bobcat call trac (my dealer sent me the same thing in a email) and saw it says use your foot or brake but in a tight area that is not good if the pedal stays stuck.

    I have not seen that from Bobcat, can you post what it actually says or provide a link?

    I have never had my spring replaced and mine is still lazy, the dealer lubed it up once, but it never really helped

  9. #29
    Super Member 94BULLITT's Avatar
    Join Date
    Feb 2011
    Posts
    8,314
    Location
    Frederick County, VA
    Tractor
    Kubota BX2360 & L4240 HSTC

    Default Re: Lazy Hydro Pedal

    Quote Originally Posted by lilranch2001 View Post
    I have not seen that from Bobcat, can you post what it actually says or provide a link?

    I have never had my spring replaced and mine is still lazy, the dealer lubed it up once, but it never really helped
    Look at post 23.

  10. #30
    Veteran Member SSdoxie's Avatar
    Join Date
    Jun 2010
    Posts
    2,382
    Location
    Cumberland Plateau, TN
    Tractor
    Bobcat CT225

    Default Re: Lazy Hydro Pedal

    There is a new dampner available part #7022773. It has 2 springs in it, 1 inside the other. I put it on mine and makes a huge difference. This dampner is visually different, it does not have the fluid check hole at 9:00 o'clock position on side of the housing. It still has the drain plug at the bottom.
    Dennis

    CT225 w/7TL QA FEL, 60"tooth dirt bucket, 68" smooth bucket, Pallet Forks, Bale Spear. Hydrualic top llin, QH, 48 RC, 60" tiller, Angle blade, Landscape rake, Carry-all, Post hole auger.

Page 3 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Lever Hydro vs. Pedal Hydro
    By slim in forum General Lawn & Garden
    Replies: 21
    Last Post: 04-13-2009, 12:10 AM
  2. Hydro pedal doesn't return
    By -r0b- in forum Kubota Owning/Operating
    Replies: 5
    Last Post: 04-02-2009, 08:27 PM
  3. 4115 hydro pedal bracket issue
    By B2400 in forum John Deere Owning/Operating
    Replies: 0
    Last Post: 05-05-2006, 10:55 PM
  4. MECHANICAL HYDRO, OR E-HYDRO? ANY OPINIONS?
    By JasonMac in forum John Deere Buying/Pricing
    Replies: 6
    Last Post: 11-28-2005, 09:40 PM
  5. BX Hydro Pedal - again
    By Anonymous Poster in forum Kubota Owning/Operating
    Replies: 6
    Last Post: 08-24-2001, 10:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.