Rudevette
Bronze Member
So I finally got around to taking some pictures of the additional work lighting that I installed on my CT235. For the front work lights I wanted to get them up a little bit above the loader arms to get the beams out over the top of the bucket. The rear is tucked in next to the rops where it is out of the way. The rear light is hooked onto the factory wire for rear work light. The front lights are hooked into an extra fuse slot in the fuse panel then wires through a relay. The front lights have plugs on the wiring to disconnect them when the loader is removed (although the laoder has never been off of this tractor) Here is: