Clearing house - things that can go.....

   / Clearing house - things that can go..... #1  

Jon Deer

New member
Joined
Jan 28, 2011
Messages
10
Location
Finger Lakes area of New York - the State, not tha
Tractor
JD x585
Have a pair of Bolens ST110 tractors -
White model - has 36" Deck #30036S with new bearings and pulleys;
also, have a second Deck # 30036S used for parts.
Tractor has a manual accessory lift,
(right front tire has slow leak).

Green model - has the electric accessory lift.

Also, have a Snowblower #30138, and a Power Packer #30912.

Both have 11 hp Briggs & Stratton I/C motors with cast iron bores.

They have been sitting and are currently not running well,
they both need tune-ups.

(Might part them out as well if someone needs something)


the plow/blade is not available at this time -
(thinking of adapting it to my JD if possible).

Plus - - -

Curtis Cab, soft sided - JD green and yellow.
Hard top and frame, with soft side doors and rear panel.
Cab and doors are in good condition.
Windshield lifts and fastens in place for access hood and engine.

Should fit John Deere models:
LX, GT, 200, 300,325,345, Sabre YT & GT -
and probably a variety of other models and brands.
Mounts via 6 brackets (included).

Has windshield wiper,
overhead lights (currently disconnected);
and, rear red marker lights.

If interested - send me a message for photo's and prices...
 
   / Clearing house - things that can go.....
  • Thread Starter
#2  
You might want to list where you're located and if you can transport any of these items any distance.

I won't mention the name of the other tractor forum that I swear this one is linked with...

I distinctly remember inputing my info, only to have nothing come up :confused2:

So, once again, I'll go into the system and input the info:mad:

"Thanks!"
 
Last edited:
   / Clearing house - things that can go..... #3  
I'm interested in the 30912 Power Packer. What kind of shape is it in? How much do you want for it? How far are you from Skaneateles? Al
 
 
Top