Results 1 to 8 of 8
  1. #1
    New Member
    Join Date
    Jan 2013
    Posts
    23
    Location
    Paw Paw Illinois
    Tractor
    Bolen 1402

    Default bolens 1402 charging system

    -regulator1-jpg-regultar2-jpg

    Not sure what this does .Is it part of the charging system

  2. #2
    Platinum Member
    Join Date
    Oct 2010
    Posts
    503

    Default Re: bolens 1402 charging system

    Yep, it's the RR, Regulator Rectifier....Mike

  3. #3
    New Member
    Join Date
    Jan 2013
    Posts
    23
    Location
    Paw Paw Illinois
    Tractor
    Bolen 1402

    Default Re: bolens 1402 charging system

    Thanks I thought it might be what it was but wanted to make sure before I try to replace it to see if I can get a charge to the system

  4. #4
    Platinum Member
    Join Date
    Oct 2010
    Posts
    503

    Default Re: bolens 1402 charging system

    I've replaced two on two different machines, Here's where I bought mine Voltage Regulator for Briggs 394890 691185 797375 | eBay .
    Check the stator output to make sure it's working before you put money into a RR. Un plug the two wire plug and check for AC voltage around 2Krpm or so, I think it's supposed to be around 25V or so. Someone will be along and tell you the correct voltage I'm sure.....mike

  5. #5
    New Member
    Join Date
    Jan 2013
    Posts
    23
    Location
    Paw Paw Illinois
    Tractor
    Bolen 1402

    Default Re: bolens 1402 charging system

    going to buy a multimeter and check it out. Will let you no what I find. If I get no amps at plug does that mean the stator is bad or dirty

  6. #6
    Platinum Member
    Join Date
    Oct 2010
    Posts
    503

    Default Re: bolens 1402 charging system

    You wont be reading amps, to read amps there has to be a load and the ammeter has to be in series with the load, you'll be reading AC volts. If you get no ACV between the two wires (RR unplugged) coming from under the flywheel (stator) it means the stator went south, the magnets either went with them or by themselves or the wire itself is bad. 10 chances to one it's the RR tho, so it'd be an easy fix....Mike

  7. #7
    New Member
    Join Date
    Jan 2013
    Posts
    23
    Location
    Paw Paw Illinois
    Tractor
    Bolen 1402

    Default Re: bolens 1402 charging system

    I think I did it right .I placed the leads from the meter to the terminals from the stator i got a reading of 19 volts.

  8. #8
    Platinum Member
    Join Date
    Oct 2010
    Posts
    503

    Default Re: bolens 1402 charging system

    You're good, go for the RR....Mike

Similar Threads

  1. Bolens 1402 elemiter charging system
    By dday1949 in forum Bolens
    Replies: 0
    Last Post: 06-22-2013, 01:51 PM
  2. Charging system
    By romoshka in forum Yanmar
    Replies: 5
    Last Post: 03-23-2012, 05:21 PM
  3. charging system
    By ndkat in forum Massey Ferguson Owning/Operating
    Replies: 1
    Last Post: 10-25-2010, 08:19 AM
  4. New here with a ?? on a charging system.
    By GeeWally in forum General Lawn & Garden
    Replies: 2
    Last Post: 05-25-2008, 05:38 PM
  5. RTV charging system
    By J_mack in forum ATVs & Utility Vehicles
    Replies: 1
    Last Post: 10-16-2004, 09:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.