Renze
Elite Member
I have been looking to build a bale shredder, basically the idea was to convert an on field flail shredder with a 3pt hitch feeder bunk, to chop straw bales.
I tried the flail shredder on a bale by driving into it, but the horses were all coughing and it generated so much dust that vision was limited to about halfway the barn.
That means, shredding is a bad idea.
I have another idea, more like a blade slicer to cut bales into 10 cm long portions which dont make dust, but it does make manual stable cleaning a whole lot easier, because you dont have to tear apart the thick carpet of long and tramped straw.
Is there anything on the market that sounds like this, so i can copy the design ?
I tried the flail shredder on a bale by driving into it, but the horses were all coughing and it generated so much dust that vision was limited to about halfway the barn.
That means, shredding is a bad idea.
I have another idea, more like a blade slicer to cut bales into 10 cm long portions which dont make dust, but it does make manual stable cleaning a whole lot easier, because you dont have to tear apart the thick carpet of long and tramped straw.
Is there anything on the market that sounds like this, so i can copy the design ?