picanoor
Bronze Member
- Joined
- Aug 8, 2010
- Messages
- 55
- Location
- angleton texas
- Tractor
- Massey Ferguson 254 John Deere 990-4700-5310-new holland tn65-kubota l3300-l4200Ferguson to 30,1951-to30,1954, ford 2n 1947, ford 2n 1943 jd 5200, jd 301a, alllis chalmers 45c, John Deere 5200
I want to convert my L7300 phd into a hydraulic one which will hook to my jd5310 fel.
I have a hydraulic motor brand Char-lynn 101 1025-009 with 12-14 gpm flow delivering 650-876inch/lbs torque
Does anybody have an idea if this motor gives enough torque and speed to run the post hole digger? JD deliveres 11gpm but i am working on a PTO pump with 21gpm for an other project so the flow should be ok.
the Motor speed is twice the 540 of the tractor so this doubles my torque?
Thanks for the input.
Pete.
motor details:
2.8 cu in CHAR-LYNN 101-1025 HYD MOTOR
Brand new CHAR-LYNN H series motors. Gerotor power element. Interchangeable with the following motor lines: Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS
* Disp. 2.8 cu. in. / rev.
* Motor Type Gerotor
* Pressure:
1800 PSI cont.
2400 PSI int.
* Torque:
650 in-lbs. cont.
876 in-lbs. int.
* Speed:
969 RPM cont.
1127 RPM int.
* Flow:
12 GPM cont.
14 GPM int.
* Rotation Reversible
* Mount 2 bolt SAE A
* Shaft 1" dia. x 1-3/4" keyed
* Ports 1/2" NPT
* Case Drain N/A
* Size 5-1/4" x 3-5/16" x 3-5/16"
* Shpg. 13 lbs.
I have a hydraulic motor brand Char-lynn 101 1025-009 with 12-14 gpm flow delivering 650-876inch/lbs torque
Does anybody have an idea if this motor gives enough torque and speed to run the post hole digger? JD deliveres 11gpm but i am working on a PTO pump with 21gpm for an other project so the flow should be ok.
the Motor speed is twice the 540 of the tractor so this doubles my torque?
Thanks for the input.
Pete.
motor details:
2.8 cu in CHAR-LYNN 101-1025 HYD MOTOR
Brand new CHAR-LYNN H series motors. Gerotor power element. Interchangeable with the following motor lines: Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.
SPECIFICATIONS
* Disp. 2.8 cu. in. / rev.
* Motor Type Gerotor
* Pressure:
1800 PSI cont.
2400 PSI int.
* Torque:
650 in-lbs. cont.
876 in-lbs. int.
* Speed:
969 RPM cont.
1127 RPM int.
* Flow:
12 GPM cont.
14 GPM int.
* Rotation Reversible
* Mount 2 bolt SAE A
* Shaft 1" dia. x 1-3/4" keyed
* Ports 1/2" NPT
* Case Drain N/A
* Size 5-1/4" x 3-5/16" x 3-5/16"
* Shpg. 13 lbs.