3pt Forks to De-thatcher

   / 3pt Forks to De-thatcher #1  

tmajor

Platinum Member
Joined
Oct 9, 2007
Messages
704
Location
NE PA
Tractor
2010 MF 1529, Woods ZTR MZ1952, National Mower sickle bar circa 1963
This isn't too exciting, unless you need one.

This is an old build, which I created, when I was redoing my front lawn. I didn't want to have to build the whole 3 pt assembly, so I used the forks frame, which I don't use that often. Even at that, the De-thatcher is quickly removable from the frame, by pulling 4 pins. The tines are from ?? J-D (they were green) tedder, haybine or something.
 

Attachments

  • thatch1.jpg
    thatch1.jpg
    36.5 KB · Views: 695
  • thatch2.jpg
    thatch2.jpg
    36.3 KB · Views: 552
  • Dthach2.jpg
    Dthach2.jpg
    296 KB · Views: 539
   / 3pt Forks to De-thatcher #2  
Clever use of old stuff! Good work.
 
   / 3pt Forks to De-thatcher #3  
Good work.
13.gif
 
   / 3pt Forks to De-thatcher #4  
Nice Job, I like it... you could always add another set tines if you need them...
 
 
Top