Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    New Member
    Join Date
    Nov 2011
    Posts
    1
    Tractor
    dynamark

    Default dynamark lawn tractor

    im trying to make a steel snow plow for my tractor any ideas

  2. #2
    Administrator Muhammad's Avatar
    Join Date
    Mar 1998
    Posts
    11,285
    Location
    San Diego, CA
    Tractor
    None currently

    Default

    Welcome to TBN.
    Muhammad Chishti
    Administrator

  3. #3
    Elite Member Briana03's Avatar
    Join Date
    Jul 2010
    Posts
    3,292
    Location
    San Diego, California
    Tractor
    None

    Default Re: dynamark lawn tractor

    WELCOME to TBN

    I moved your thread to the Build-It Yourself Forum.
    Briana
    TBN Support

  4. #4
    Bronze Member rubes2311's Avatar
    Join Date
    Aug 2012
    Posts
    66
    Location
    Peterborough, Ontario
    Tractor
    Dynamark

    Default

    I used angle iron and sheet metal for mine and it can plow 10 to 15cm of heavy snow
    Attached Thumbnails Attached Thumbnails -image-2856343033-jpg   -image-1868557217-jpg  

  5. #5
    Bronze Member
    Join Date
    Mar 2009
    Posts
    77
    Location
    Vermont
    Tractor
    Cub Cadet 1512

    Default Re: dynamark lawn tractor

    You might want to look around on Craig's list for an atv or lawn tractor plow. Then just build the frame to mount it. I did that with my cub cadet. The curved plow blade helps to roll the snow. Based on Vermont Craig's list for $100 or less you find something.

  6. #6
    Bronze Member rubes2311's Avatar
    Join Date
    Aug 2012
    Posts
    66
    Location
    Peterborough, Ontario
    Tractor
    Dynamark

    Default

    It pushes snow pretty good and im only 15 and im trying not to spend any money on this project.

  7. #7
    Veteran Member
    Join Date
    Feb 2007
    Posts
    1,159
    Location
    easten Colorado
    Tractor
    JD 4020

    Default Re: dynamark lawn tractor

    I made a blade for my old lawn tractor out of a old hot water heater, shell, jsut cut to lenght and cut the section I wanted it was pre curved, and welded on a wear edge,

  8. #8
    Bronze Member rubes2311's Avatar
    Join Date
    Aug 2012
    Posts
    66
    Location
    Peterborough, Ontario
    Tractor
    Dynamark

    Default

    A friend of mine said to do that but i had trouble finding a hot water tank

  9. #9
    Elite Member Don87's Avatar
    Join Date
    May 2010
    Posts
    4,226
    Location
    SW Pa.
    Tractor
    Massey Ferguson GC2400

    Default Re: dynamark lawn tractor

    Quote Originally Posted by rubes2311 View Post
    A friend of mine said to do that but i had trouble finding a hot water tank
    I have one that you are more than welcome to pick up.
    Don

    MF GC2400, FEL, 60in.MMM, 5ft. Cultivator, Single Bottom Plow, Bush Hog RTC48 tiller, MF 2360 front mount snowblower, 5ft backblade. BXpanded Piranha toothbar.

  10. #10
    Bronze Member rubes2311's Avatar
    Join Date
    Aug 2012
    Posts
    66
    Location
    Peterborough, Ontario
    Tractor
    Dynamark

    Default

    Thanks for the offer but no thanks.

Page 1 of 2 12 LastLast

Similar Threads

  1. What strange things have you moved with your loader..pics
    By YesDeere in forum Owning/Operating
    Replies: 359
    Last Post: 08-04-2014, 08:10 PM
  2. Replies: 14
    Last Post: 04-10-2011, 05:00 AM
  3. Buying Advice Lawn Tractor for 1/3rd Acre Flat
    By MikeFitz11 in forum Buying/Pricing/Comparisons
    Replies: 24
    Last Post: 07-10-2010, 08:05 PM
  4. GC-2310 Update -- The latest and greatest
    By Mike_in_Okla in forum Massey Ferguson Owning/Operating
    Replies: 23
    Last Post: 03-19-2006, 02:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.