Page 4 of 21 FirstFirst 123456714 ... LastLast
Results 31 to 40 of 206
  1. #31
    Platinum Member KennyG's Avatar
    Join Date
    Jan 2011
    Posts
    998
    Location
    SW Michigan
    Tractor
    John Deere 2320

    Default Re: Garage/Shop Projected started Here are some Pic's

    Quote Originally Posted by JOE G View Post
    I would like to get the garage doors like that but everything I have seen has been very pricey, Do you guys have any links to places to buy them from? Opening is 16 Ft by 9.5 Ft High.
    I don't think you can do much better than the prices from Lowes, Menards, etc. for new doors. Check with them on prices and see when they are going on sale. You can check Craigs List for bargains. I bought a new insulated 9 wide by 8 high for $150 on CL. The problem comes in doors over 8 feet tall as they are not standard residential doors.

  2. #32
    Member
    Join Date
    Oct 2012
    Posts
    34
    Location
    placerville ca.
    Tractor
    bobcat

    Default Re: Garage/Shop Projected started Here are some Pic's

    Nice looking build, love your foundation

  3. #33
    Platinum Member
    Join Date
    Feb 2012
    Posts
    837
    Location
    sioux city, ia
    Tractor
    Oliver 1855, Case 1840, Cub 1550

    Default Re: Garage/Shop Projected started Here are some Pic's

    For an overhead door get a comercial insulated door with no profile design, in brown, paint a black line 1/4" wide down the center, so it looks like 2 doors.

    Then purchace a carage house door trim kit $98 on E-Bay, comes with hinges and door handles. You could also paint thin lines 1/8 wide to look like gaps, from wood planks. Or use automotive pinstripe tape. Or have a custum vinal wrap made for the entire door. Just a few options.

    Doors would be cheaper if the opening was an even height, 10' or 9', may be to late to change?

    Dave

  4. #34
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    I will prob now go with a Cariage house Door, I have gotten two quotes from local people for around 2,500 which is better then the $4,500 Lowes and Home Depot wanted.
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  5. #35
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's





















    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  6. #36
    Silver Member birddog0304's Avatar
    Join Date
    Apr 2012
    Posts
    135
    Location
    Northeast TN
    Tractor
    John Deere/Massey Ferguson/Bobcat

    Default

    I've got shop envy!!! No windows in the loft???

  7. #37
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Yes there will be two in the rear, and there will be two in the front with a Hay mound door. There not framed in yet.
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  8. #38
    Platinum Member
    Join Date
    Feb 2012
    Posts
    837
    Location
    sioux city, ia
    Tractor
    Oliver 1855, Case 1840, Cub 1550

    Default Re: Garage/Shop Projected started Here are some Pic's

    I like the room in trusses, I see the end trusses are spliced on the bottom joist, but are the center also? From the pic, it apears that they all have truss plates in the same location. It seems like that would weaken the floor? Or do you sister another joist next to it?

    Dave

  9. #39
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Thats the way the company wanted them laid out in the instruction/spec sheet that came with them. They do get some extra bracing.
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  10. #40
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    So my Garage is 28 X 28 , I have Radiant heat in the floor for the first floor with 10 Ft Ceilings, On the second floor I have a 16 x 28 Room with 8 Ft ceilings, I was thinking about heating the second floor with Electric Baseboard,
    I was wondering if you guys think this is a good idea, if so how many Base boards should I get and what size?
    Also what kind of wire do I need to hook them all up to one thermostat?
    Should I get a wall mounted one or one that is mounted right to the unit.
    I only plan to keep the garage at about 50 Deg, but would like to be able to bring it to 70 If need be. I don't need it to raise fast. Thanks
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

Page 4 of 21 FirstFirst 123456714 ... LastLast

Similar Threads

  1. Started Garage/Shed this week
    By efam3300 in forum Projects
    Replies: 14
    Last Post: 07-27-2012, 10:27 PM
  2. New shop/garage
    By JD6430 in forum Projects
    Replies: 46
    Last Post: 06-06-2012, 01:15 AM
  3. Getting my garage started
    By dieselsmoke1 in forum Photos
    Replies: 0
    Last Post: 09-08-2009, 09:58 PM
  4. 36x48 Garage/Shop
    By GaryInWA in forum Projects
    Replies: 5
    Last Post: 08-23-2007, 11:21 AM
  5. Started rebuilding my shop!
    By Boondox in forum Projects
    Replies: 37
    Last Post: 01-10-2004, 07:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.