Page 7 of 21 FirstFirst ... 4567891017 ... LastLast
Results 61 to 70 of 206
  1. #61
    Gold Member
    Join Date
    Mar 2010
    Posts
    344
    Location
    South PA/Western MD

    Default Re: Garage/Shop Projected started Here are some Pic's

    Quote Originally Posted by JOE G View Post
    Yes I am running #2 URD from shop to house and then into a j box and switching to SER to run in house to the box.
    Don't forget that you have to run a total of 4 wires (equipment ground). The subpanel in your new shop also has to have the neutral and equipment ground on seperate buses and not electrically tied together.

  2. #62
    Gold Member
    Join Date
    Mar 2010
    Posts
    344
    Location
    South PA/Western MD

    Default Re: Garage/Shop Projected started Here are some Pic's

    Quote Originally Posted by birddog0304 View Post
    I had a small project running underground electric to an out building (10-3 with a ground rated for underground). I mentioned to the guy about running it in conduit; he said absolutely not, as that it being rated for underground is made a specific way that allows heat to dissipate. Running it in conduit could allow it to over heat and melt.
    Yes, they gave you correct information but URD (or UD) and UF which you ran are different animals. It's not normally advised to run jacketed cable in conduit but you can as long as the ampacity is derated. I think even URD has a slight derating in conduit but it's a good way to install for trouble free or rocky soil.

  3. #63
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Birddog what you said seems to make sense, But a lot of what I have read and have been told that it is better to run it in conduit, I did way oversize my Conduit for easy of pull and to help with any heat issues.

    Workstead, I am running 12-2 Romex and 20 Amp outlets, I am putting in way more outlets then I think Ill need just to be sure, I am sticking some out side also, along with some in the ceiling and in the floor upstairs. I am running a few quads up front.
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  4. #64
    Bronze Member
    Join Date
    Nov 2012
    Posts
    81
    Location
    Land Between the Lakes
    Tractor
    John Deere 3038e

    Default Re: Garage/Shop Projected started Here are some Pic's

    Looks great.... thanks for posting progress pics along the way...


    John Deere 3038e
    Kentucky

  5. #65
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Here are some Updated pic's, It's coming along, and also some shots of the view.







    [IMG]http://i1229.photobucket.com/albums/ee463/JoeyGags/Garage%202012/PB250117.jpg[/IMG





















    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  6. #66
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's





    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  7. #67
    Silver Member
    Join Date
    Jan 2004
    Posts
    242
    Location
    Northern California
    Tractor
    TS1610

    Default Re: Garage/Shop Projected started Here are some Pic's

    Nice project. Thank for the pictures. I notice the ground/dirt is in contact with the wood siding by the side door and the back of the garage. I think that will lead to root in the wood siding in those areas. It could just be the angles in the photos. Any feedback from others?

  8. #68
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Good Eye, Yes the Crusher run is touching the siding on the right front corner for about a foot, I just need to dig it out a touch, In the rear it looks like the dirt is touching but there is about 3 to inches of space, I plan to dig a touch more out, figured I would wait till everything is done and I can touch up the ground all around the building.
    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  9. #69
    Silver Member JOE G's Avatar
    Join Date
    Aug 2012
    Posts
    237
    Location
    Eastern NY
    Tractor
    Husqvarna / John Deere

    Default Re: Garage/Shop Projected started Here are some Pic's

    Got the windows in, door upstairs framed out and saddle in, I also added a Brace at the peak to reinforce it for the Antique Block and Tackle BARN PULLEY system that I got that still is in working shape.

    Sofits are also in on the front and I started to put the outlet boxes in.






















    Husqvarna YTH24V48LS
    John Deere LT 133
    Husqvarna 7021P
    Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
    Husqvarna Rancher 55 2005
    Husqvarna 450 Anniversary Edition 2010
    STIHL 009 1998
    STIHL HT 131 Pole Saw 2012
    STIHL FS 110 R Trimmer 2010
    STIHL BR 600 Magnum Blower2012

  10. #70
    New Member
    Join Date
    Nov 2012
    Posts
    9
    Location
    Middle Grove, NY
    Tractor
    Shopping for my first!

    Default Re: Garage/Shop Projected started Here are some Pic's

    Great project! Where in Eastern NY?

Page 7 of 21 FirstFirst ... 4567891017 ... LastLast

Similar Threads

  1. Started Garage/Shed this week
    By efam3300 in forum Projects
    Replies: 14
    Last Post: 07-27-2012, 10:27 PM
  2. New shop/garage
    By JD6430 in forum Projects
    Replies: 46
    Last Post: 06-06-2012, 01:15 AM
  3. Getting my garage started
    By dieselsmoke1 in forum Photos
    Replies: 0
    Last Post: 09-08-2009, 09:58 PM
  4. 36x48 Garage/Shop
    By GaryInWA in forum Projects
    Replies: 5
    Last Post: 08-23-2007, 11:21 AM
  5. Started rebuilding my shop!
    By Boondox in forum Projects
    Replies: 37
    Last Post: 01-10-2004, 07:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.