Results 71 to 80 of 154
-
12-06-2012, 07:32 PM #71
Re: Garage/Shop Projected started Here are some Pic's
Sullivan county
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
12-06-2012, 08:48 PM #72Gold Member
- Join Date
- Mar 2010
- Posts
- 327
- Location
- South PA/Western MD
Re: Garage/Shop Projected started Here are some Pic's
Nice looking woodwork.
-
12-07-2012, 11:52 AM #73Platinum Member
- Join Date
- Sep 2010
- Posts
- 632
- Location
- Eastern Ontario
- Tractor
- Kubota MX5100
Re: Garage/Shop Projected started Here are some Pic's
Very nice!
2011 Kubota MX5100, BH92, BH BB72, Walco Bush Hog and Snowblower, Wallenstein 310 Splitter & Forks
-
12-07-2012, 12:04 PM #74
Re: Garage/Shop Projected started Here are some Pic's
Trying Rough cut isn't always the easiest as it tends to dry and move.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
12-07-2012, 02:18 PM #75
Re: Garage/Shop Projected started Here are some Pic's
Very nice indeed!
Like your rotties too.
I have 3 myself.2012 JD 2320, HOMEMADE CANOPY, 54" FRONT BLADE, 54" MID DECK MOWER, HYDRAULIC ANGLE 60" REAR BLADE, QUICK HITCH, STAINLESS FRONT MOUNT SPRAY TANK W/BOOM, 200CX LOADER W/ 61" BUCKET, HOMEMADE BALLAST BOX,HOMEMADE BUCKET GRAPPLE
1998 "BIG DOOLEY" Chevy K3500 Crew Cab (36.000 miles & counting)
United Steel Workers Union 12934
-
12-12-2012, 11:09 AM #76
Re: Garage/Shop Projected started Here are some Pic's
Got the Garage door in just need to finish the trim and weather stripping on the out side, Got some more Battens up and started to get the door for the up stairs built, figured I d also show a little detail of the Support for the pulley system that is going off the front.

















Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
12-12-2012, 01:07 PM #77
Re: Garage/Shop Projected started Here are some Pic's
Forgive my ignorance on this subject.
When you have a space that could be considered a garage,with a space considered liveable,they are supposed to be sealed off from one another.Most of the time it's done with a solid wood door with a full jam.This is supposed to keep gasses from engine from settling in the livable areas.Will you be required to do this and how would you do it in your building?
I was denied a permit for this reason when I wanted to build a 24x24 on my house.They BI said it's a no no to have windows or other openings that lead into a space that could be used to house vehicles equipped with engines.I would have had to tear out and enclose three windows in the side of my house before I would be granted a permit for the 24x24 garage addition.I'm in an area with laxed building codes.Looking to relocate to 20+ wooded acres with a good flowing creek, or river, with rolling hills in upstate SC..
Ben's Boat Blog
Manic Cycles
Survivals Fittest
-
12-12-2012, 01:38 PM #78
Re: Garage/Shop Projected started Here are some Pic's
I don't have an answer for you, I am guessing since it was attached to your home they don't want the fumes getting in, In my area there are a lot of shops built like mine with living area up top. I am not using the top for a living area.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
12-15-2012, 11:17 AM #79
Re: Garage/Shop Projected started Here are some Pic's
Here is the front pretty much done except for the Top door, The Picture of the two small 2x4 is the support for the dowel that goes into the building that holds the rope. The weather stripping for the garage door is behind the door trim used a Dado blade to cut the grooves.
The Pictures from the field show the 300 Plus foot Ditch that I put in last year you keep the water from coming off the hill to fast or to much, it keeps it off the main yard for the house, the itch is 6 foot deep at it's deepest and is filled with ditch stone, it empties to a stream on both ends, the dirt that came out of the ditch went ont eh downhill side to act as a back stop.
























Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
12-15-2012, 11:18 AM #80
Re: Garage/Shop Projected started Here are some Pic's
Getting there The weather has been great.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
Similar Threads
-
Started Garage/Shed this week
By efam3300 in forum ProjectsReplies: 14Last Post: 07-27-2012, 10:27 PM -
New shop/garage
By JD6430 in forum ProjectsReplies: 46Last Post: 06-06-2012, 01:15 AM -
Getting my garage started
By dieselsmoke1 in forum PhotosReplies: 0Last Post: 09-08-2009, 09:58 PM -
36x48 Garage/Shop
By GaryInWA in forum ProjectsReplies: 5Last Post: 08-23-2007, 11:21 AM -
Started rebuilding my shop!
By Boondox in forum ProjectsReplies: 37Last Post: 01-10-2004, 07:22 AM


Reply With Quote
