200TrueBlue
Member
Giving it a shot !! No welder or fabricator/designer here but seeing there is no cab available soft or hard i
figured i would try and come up with something for the winter. This is what i've got so far and need
to come up with some ideas what to cover it with? PT Plywood painted black for the lower sections
and lexan for the door, front window and back. I could also have the local sail shop make something
from that heavy truckers vinyl fabric with plastic windows and a lexan front?
Had to make a bracket to move the FEL control in and it looks much better with
hoses inside the frame. Also the Brake had to be modified to fit inside.
Frame mounts on the floor boards with two existing holes and also one bracket at
the rear with one of the ROP bolts. (3/4" Tubing)
Right now its about 50lbs and i can lift it off no problem.
figured i would try and come up with something for the winter. This is what i've got so far and need
to come up with some ideas what to cover it with? PT Plywood painted black for the lower sections
and lexan for the door, front window and back. I could also have the local sail shop make something
from that heavy truckers vinyl fabric with plastic windows and a lexan front?
Had to make a bracket to move the FEL control in and it looks much better with
hoses inside the frame. Also the Brake had to be modified to fit inside.
Frame mounts on the floor boards with two existing holes and also one bracket at
the rear with one of the ROP bolts. (3/4" Tubing)
Right now its about 50lbs and i can lift it off no problem.