Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Elite Member Rustyiron's Avatar
    Join Date
    Mar 2011
    Posts
    2,563
    Location
    Lakes Region, Maine
    Tractor
    M 9540 Kubota

    Default Frame mount snowplow Kubota 9540

    I found a good deal on a Fisher 9.5 EZ Vee without the "tower". I made this frame mount so that I can use the (3) circuits for the loader to make the wings work and power the lift cylinder. This frame attachment keeps the plow close to the tractor and takes the bumps & shock off the loader arms. Until we get a nice "snow road", I'm plowing on the rough dirt roads.
    Next is the cylinder mount and upper "arm". The big lower part below the angle's is easily removable with 8- 3/4 inch bolts. That frame is not ground clearance friendly I'll follow up with the "lift" assay. & when painted.
    Attached Thumbnails Attached Thumbnails Frame mount snowplow Kubota 9540-dscn3970-jpg   Frame mount snowplow Kubota 9540-dscn3971-jpg   Frame mount snowplow Kubota 9540-dscn3972-jpg   Frame mount snowplow Kubota 9540-dscn3981-jpg   Frame mount snowplow Kubota 9540-dscn3986-jpg  

    Frame mount snowplow Kubota 9540-dscn3991-jpg   Frame mount snowplow Kubota 9540-dscn3996-jpg   Frame mount snowplow Kubota 9540-dscn3998-jpg   Frame mount snowplow Kubota 9540-dscn4001-jpg  
    ]We need more people to WORK for a living and less people to VOTE for a living!
    (proven on 11/6/12)

  2. #2
    Bronze Member
    Join Date
    May 2012
    Posts
    55
    Location
    Kingston, New York
    Tractor
    Kubota L3800

    Default Re: Frame mount snowplow Kubota 9540

    nice job!

  3. #3
    Veteran Member
    Join Date
    Feb 2014
    Posts
    1,326
    Location
    Metro/Brainerd, MN
    Tractor
    JD 5065e MFWD w/553 FEL

    Default Re: Frame mount snowplow Kubota 9540

    Looks very stout and nicely made.

    How much ground clearance do you have left under that?

  4. #4
    Elite Member Rustyiron's Avatar
    Join Date
    Mar 2011
    Posts
    2,563
    Location
    Lakes Region, Maine
    Tractor
    M 9540 Kubota

    Default Re: Frame mount snowplow Kubota 9540

    Thanks
    There's just under 12" of clearance. With a "V" blade, you need to keep the center (hinge) pin vertical so that the plow contacts the ground throughout it's range of motion. This dictates the mounting height unless I were to make some different configuration on the plow's A frame itself, I didn't really want to change the plow so that it wouldn't fit back on a truck.
    ]We need more people to WORK for a living and less people to VOTE for a living!
    (proven on 11/6/12)

  5. #5
    Veteran Member
    Join Date
    Feb 2014
    Posts
    1,326
    Location
    Metro/Brainerd, MN
    Tractor
    JD 5065e MFWD w/553 FEL

    Default Re: Frame mount snowplow Kubota 9540

    Yep, it's just hard to tell how close to the ground the mount is in your pictures.

  6. #6
    Veteran Member skyhook's Avatar
    Join Date
    Mar 2013
    Posts
    1,809
    Location
    Canada Ontario
    Tractor
    1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4

    Default Re: Frame mount snowplow Kubota 9540

    RustyIron, do mind telling me how much you paid for that V plow.
    Looks very nice.

  7. #7
    Elite Member Rustyiron's Avatar
    Join Date
    Mar 2011
    Posts
    2,563
    Location
    Lakes Region, Maine
    Tractor
    M 9540 Kubota

    Default Re: Frame mount snowplow Kubota 9540

    Skyhook, I got it for $650, it is in real nice shape but was missing one of the cylinders and could use cutting edge's soon.
    Attached Thumbnails Attached Thumbnails Frame mount snowplow Kubota 9540-dscn3841-jpg   Frame mount snowplow Kubota 9540-dscn3842-jpg  
    ]We need more people to WORK for a living and less people to VOTE for a living!
    (proven on 11/6/12)

  8. #8
    Veteran Member skyhook's Avatar
    Join Date
    Mar 2013
    Posts
    1,809
    Location
    Canada Ontario
    Tractor
    1996 Kubota L4200 GSTC,(sold) 1994 JCB 210S 4x4x4

    Default Re: Frame mount snowplow Kubota 9540

    Wow, you scored big time with that one.
    Wouldn't mind finding a deal like that myself.

  9. #9
    Super Member
    Join Date
    Dec 2007
    Posts
    7,441
    Location
    Central Ohio
    Tractor
    JD 5520, 790 TLB-- Kub L4300, B7800, MX5100, M6800

    Default Re: Frame mount snowplow Kubota 9540

    That is a sweet setup. I'll presume that's a Fisher plow so you could plow whatever you want and not break anything.
    ****

    May I be the kind of person my dogs think I am,

  10. #10
    Gold Member Winmac's Avatar
    Join Date
    Dec 2011
    Posts
    340
    Tractor
    Landini 6860

    Default

    I mounted a 9ft straight blade in a similar way and I think you'll be happy with the set up. Initially I was looking for a v blade but I was concerned about valving the angle cylinders from the tractor, the blades I looked at used single acting with spring return.
    Dose the fisher have double acting Rams?

Page 1 of 2 12 LastLast

Similar Threads

  1. frame snowplow mount
    By chuck172 in forum Build-It Yourself
    Replies: 8
    Last Post: 09-13-2014, 06:55 PM
  2. Building Frame Mount For Snow Plow - Kubota M7040
    By ctc1111 in forum Build-It Yourself
    Replies: 2
    Last Post: 08-13-2012, 10:21 PM
  3. Curtis snowplow & mount for Kubota RTV 900
    By coobie in forum ATVs & Utility Vehicles
    Replies: 4
    Last Post: 07-21-2008, 04:58 AM
  4. Snowplow Frame.....Super A
    By scott_vt in forum Build-It Yourself
    Replies: 36
    Last Post: 03-01-2007, 07:55 AM
  5. Are Kubota BH 3-Point mount or Frame Mount?
    By RickeyL in forum Kubota Buying/Pricing
    Replies: 11
    Last Post: 07-01-2003, 08:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.