CADplans
Elite Member
I was watching too many YouTube videos during the hot weather,
and I ran across a video of a LandPlane,,
THEN, I got to reading the DIY's of LandPlanes on TBN,
OK,, I am hooked, I gotta HAVE one!!
If I didn't have the material, I would run out and buy one,,,
but,, I happen to have all the material setting in a field.
Right now, I am predicting my out of pocket costs to be some gasoline for the welder.
I was gonna build one 6 feet long, and 8 feet wide,,, but,,,
if something happens to my current tractor, I would probably replace it with the next size smaller.
So, I have changed my plan to be a 5 feet long,, 7 feet wide one.
Today, I spent some time "tuning" my 9x16 saw,,,
then I "guessed" what material to use, and started selecting it from my stockpile.
My drill press does great up to 7/8" and struggles with 1" and beyond (small inverter), so I will make it CAT I.
The sides will be 1/2" X 12",, other than that,,,, Hmmmmmm,,,
Any and all recommendations of what to include in the design would be greatly appreciated!!
and I ran across a video of a LandPlane,,
THEN, I got to reading the DIY's of LandPlanes on TBN,
OK,, I am hooked, I gotta HAVE one!!
If I didn't have the material, I would run out and buy one,,,
but,, I happen to have all the material setting in a field.
Right now, I am predicting my out of pocket costs to be some gasoline for the welder.
I was gonna build one 6 feet long, and 8 feet wide,,, but,,,
if something happens to my current tractor, I would probably replace it with the next size smaller.
So, I have changed my plan to be a 5 feet long,, 7 feet wide one.
Today, I spent some time "tuning" my 9x16 saw,,,
then I "guessed" what material to use, and started selecting it from my stockpile.
My drill press does great up to 7/8" and struggles with 1" and beyond (small inverter), so I will make it CAT I.
The sides will be 1/2" X 12",, other than that,,,, Hmmmmmm,,,
Any and all recommendations of what to include in the design would be greatly appreciated!!