Results 1 to 4 of 4
  1. #1

    Join Date
    Jul 2003
    Posts
    39
    Location
    Southwest Georgia
    Tractor
    John Deere 670 and John Deere 140

    Default Home made EZ weights.

    Here are some pictures of my "knock off" ez weights system. I used 1/4" plate for the base and 1" all-thread for the bar. I bought the plate locally and it had been cut into rough circles with a plasma cutter, but I trued them up on a rather large lathe.
    Attached Images Attached Images

  2. #2

    Join Date
    Jul 2003
    Posts
    39
    Location
    Southwest Georgia
    Tractor
    John Deere 670 and John Deere 140

    Default Re: Home made EZ weights.

    I used a Bridgeport mill to do the bolt pattern. 1/2" carriage bolts were used to attach them to the wheel. I welded the 1" nut to the plate, but only tacked the all-thread in place in case I need to replace it in the future.
    Attached Images Attached Images

  3. #3

    Join Date
    Jul 2003
    Posts
    39
    Location
    Southwest Georgia
    Tractor
    John Deere 670 and John Deere 140

    Default Re: Home made EZ weights.

    Here they are mounted and awaiting some 25 lbs. plates.
    Attached Images Attached Images

  4. #4

    Join Date
    Jul 2003
    Posts
    39
    Location
    Southwest Georgia
    Tractor
    John Deere 670 and John Deere 140

    Default Re: Home made EZ weights.

    Another view mounted.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.