Wynnefraser
New member
- Joined
- Dec 23, 2005
- Messages
- 11
I have been working on a grader for behind the ATV but have run into a few problems, I originally planned to use electric car jack to lift and lower the blade but once I got a look at them they looked pretty weak(as in the materials they were made with) I have also look at using electric winch but the blade would swing free and there would be no down force. I also need to add more supports but that will happen along the way
I have finally decided to use hydraulic. The two options I have looked at are electric over hydraulic or a petrol motor hooked upto a hydraulic pump. I definetly like the idea of electric over hydraulic but all the products I have found would use more amp power than the ATV would generate. Using hyrdaulic would also support future projects for the ATV such as a backhoe etc...
For a look at what has been build to-date...
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1319-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1318-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1317-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1316-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1315-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1318.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1319.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1311-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1312-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1313-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1314-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1317.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1316.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1315.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1314.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1313.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1312.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1311.jpg
(This has also been posted on Machine Builders Network)
I have finally decided to use hydraulic. The two options I have looked at are electric over hydraulic or a petrol motor hooked upto a hydraulic pump. I definetly like the idea of electric over hydraulic but all the products I have found would use more amp power than the ATV would generate. Using hyrdaulic would also support future projects for the ATV such as a backhoe etc...
For a look at what has been build to-date...
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1319-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1318-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1317-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1316-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1315-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1318.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1319.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1311-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1312-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1313-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1314-1.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1317.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1316.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1315.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1314.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1313.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1312.jpg
http://i85.photobucket.com/albums/k43/wynnefraser/20-10-06_1311.jpg
(This has also been posted on Machine Builders Network)