Hydrostat pedals

   / Hydrostat pedals #1  

Gatorback

New member
Joined
Apr 2, 2007
Messages
16
Quick question.....does anyone other than Deere use the side by side 2 pedal set-up for their Hydro trannys? It seems like everyone else uses the long toe/heel single pedal. After trying both set-ups, I (and the family CFO:rolleyes: ) prefer the side by side arrangment.
 
   / Hydrostat pedals #2  
Some of the NewHolland TC models and their CaseIH DX cousins do - I think the TC35 and TC40, if I remember right.
 
   / Hydrostat pedals #3  
I believe all the new Kioti Dk hsts are twin pedal... Dk35,Dk40,Dk45
 
   / Hydrostat pedals #4  
Yes, Kioti and the larger NH TC models / Case DX models.

From what I've seen the twin pedal arrangement is at least as if not more common than the treadle used by Kubota.
 
   / Hydrostat pedals #5  
The Kubota L40's are a hybrid of the two. I spend a lot of time on all kinds of tractors, and this has been my favorite.
 
   / Hydrostat pedals #7  
Mahindra uses two pedals, one if front for the toe and on behind for the heel.
 
   / Hydrostat pedals #8  
Powertrac in a weird sort of way. Forward on the right of the wheel, reverse on the left floorboard. It is a rocker system but not toe - heel...
 
   / Hydrostat pedals #9  
TYM has a two pedal hydro. As did the TYM sourced Mahindra hydro's.
 
   / Hydrostat pedals
  • Thread Starter
#10  
Thanks all. I'll start checking out those that may have this set-up and see if I can find any dealers nearby.
 
 
Top