Results 1 to 2 of 2
  1. #1

    Default Loader removal / attachment

    I am aware that the JD loaders mount and dimount very easily. Are there other brands that are equaly easy.

    Namely NH or AGCO

    Where are the AGCOs made and by whom? Anyone had experience with their 33hp model?

  2. #2

    Join Date
    Oct 2001
    Posts
    147
    Location
    Southeastern Ohio
    Tractor
    Kubota B2910

    Default Re: Loader removal / attachment

    Tony,

    I think all of the new compacts have quick detach loaders. Some may take a few minutes longer than others - but all are pretty easy on and off (compared to the old days). I can remove / attach my FEL on my kubota in about 2-3 minutes. It is a simple operation.

    Agco's are made by Iseki. They appear to be well built tractors. One question I had - when looking at the Agco's a few months back - was downpressure (or lack thereof) on the front end loader hydraulics. I noticed that dumping the bucket (while on the ground) would not lift the front end of the tractor - like the JD, NH and Kubota does. That was one of the issues that helped make my decision to purchase a Kubota. Agco did have 0% financing for 24 months and would also throw in a brush hog with the purchase of any ST compact - which was a great deal. Good luck.

    Jeff

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.