hoffmtim
Silver Member
- Joined
- Jan 1, 2013
- Messages
- 112
- Location
- God's Country
- Tractor
- 2013 John Deere 5093e; 1949 John Deere MT; 1972 John Deere 800 windrower, restored; 2001 567 John Deere baler; 2013 CaseIH Farmall 55a MFWD
I have read a ton of threads on this site, some wonderful insight.
I am looking for help in making a decision. Last summer I downsized to a CTU (McCormick CT65U). Great little tractor, but I have changed my mind on what I want to use a tractor for and it is now too small.
I have recently looked at the following in the 75hp-100hp range:
TYM 723 - A lot of tractor for the money, but not a very recognizable brand up here in South Dakota and I dont see a lot of traffic on this tractor here on the site. Have a quote of 12k and my CT65u for a new one.
Kubota 8540 - Nice tractor, not thrilled with the dealer.
Mahindra 8560 - Tractors was solid, not thrilled with the cab layout but price is similar to TYM.
Deere 5083e - Real nice tractor, waiting on a quote from the dealer based on a config I build in the Deere configurator.
Deere 5075m - Again a nice tractor, a conservation turn in with 195 hours. Waiting on quote from same dealer.
Deere 5100m - Another conservation turn in tractor, 145 hours. Might be a little more $$$ than I want to spend but again waiting on quote from same Deere dealer.
Mccormick x10.90 - Have a quote of my CT65U and 17k for this one. Is a 2011 model that was never sold.
New Holland T4.75 - Waiting on a quote, like a lot of the cab features of this tractor.
Here's were I need help. I run a cow calf operation and have customed out my haying to a neighbor. I want now do my own haying using a properly sized round baler, and I need an FEL that will handle a 5x6 bale. My CT65U wont pick up a bale that size which really disappointed me.
I really like the Deere's, and the m series certainly is more refined than the e, but I also want to keep my expenses down. The TYM has a lot of premium features, but not as recognizable. The McCormick will probably be 5-10k cheaper than the Deere's.
I am trying to stay in the 20-25k plus my trade for a tractors/fel. Thoughts on which way to go? Would you go the TYM/Mahindra rout and save the $$, hit the McCormick middle tier or go Kubota/Deere/New Holland route?
As you can tell, I am covering all my basis with all the dealers local to me.
Thanks in advance for any advice!
I am looking for help in making a decision. Last summer I downsized to a CTU (McCormick CT65U). Great little tractor, but I have changed my mind on what I want to use a tractor for and it is now too small.
I have recently looked at the following in the 75hp-100hp range:
TYM 723 - A lot of tractor for the money, but not a very recognizable brand up here in South Dakota and I dont see a lot of traffic on this tractor here on the site. Have a quote of 12k and my CT65u for a new one.
Kubota 8540 - Nice tractor, not thrilled with the dealer.
Mahindra 8560 - Tractors was solid, not thrilled with the cab layout but price is similar to TYM.
Deere 5083e - Real nice tractor, waiting on a quote from the dealer based on a config I build in the Deere configurator.
Deere 5075m - Again a nice tractor, a conservation turn in with 195 hours. Waiting on quote from same dealer.
Deere 5100m - Another conservation turn in tractor, 145 hours. Might be a little more $$$ than I want to spend but again waiting on quote from same Deere dealer.
Mccormick x10.90 - Have a quote of my CT65U and 17k for this one. Is a 2011 model that was never sold.
New Holland T4.75 - Waiting on a quote, like a lot of the cab features of this tractor.
Here's were I need help. I run a cow calf operation and have customed out my haying to a neighbor. I want now do my own haying using a properly sized round baler, and I need an FEL that will handle a 5x6 bale. My CT65U wont pick up a bale that size which really disappointed me.
I really like the Deere's, and the m series certainly is more refined than the e, but I also want to keep my expenses down. The TYM has a lot of premium features, but not as recognizable. The McCormick will probably be 5-10k cheaper than the Deere's.
I am trying to stay in the 20-25k plus my trade for a tractors/fel. Thoughts on which way to go? Would you go the TYM/Mahindra rout and save the $$, hit the McCormick middle tier or go Kubota/Deere/New Holland route?
As you can tell, I am covering all my basis with all the dealers local to me.
Thanks in advance for any advice!