Results 1 to 9 of 9
-
02-11-2013, 10:30 PM #1New Member
- Join Date
- Feb 2013
- Posts
- 8
- Location
- Jordan/Elbridge, ny
- Tractor
- Looking to buy
Trying to get a bearing on a used tractor
I'm a month away from buying a tractor (waiting to close on the new house). Every day I look around to get a feel for price. This one caught my eye, what would the rough cost of adding a front end loader be? I've seen some well priced tractors without loaders.
Thanks!
Kubota Tractor/Snow Blower
-
02-11-2013, 11:09 PM #2Elite Member
- Join Date
- Sep 2010
- Posts
- 3,461
- Location
- PRINCE TOWNSHIP, ONTARIO
- Tractor
- MASSEY 1020 and 1945 CASE SC, 1914 1 1/2 hp EMPIRE HIT AND MISS ENGINE
Your looking at about $1500-$2500 to add a loader.
"If the women don't find you handsome, they should at least find you handy" - Red Green
PRINCE TOWNSHIP TRACTOR CRUISE WEBSITE
https://sites.google.com/site/prince...torcruise/home
-
02-11-2013, 11:13 PM #3Elite Member
- Join Date
- Feb 2011
- Posts
- 3,804
- Location
- NOT HERE
- Tractor
- ?????????
Re: Trying to get a bearing on a used tractor
Probably $4k or more unless you could find one used.
-
02-12-2013, 07:07 AM #4New Member
- Join Date
- Feb 2013
- Posts
- 8
- Location
- Jordan/Elbridge, ny
- Tractor
- Looking to buy
Re: Trying to get a bearing on a used tractor
Ouch, thanks. I'll be looking for something with a fel on it, thanks!
-
02-12-2013, 07:16 AM #5
Re: Trying to get a bearing on a used tractor
I sold my L2900 year before last and that is not a bad price. They are a good, solid, lightweight tractor. You definitely need 4WD with the loader and loaded rear tires. I never had any problems with mine during the 9 years I had it.
-
02-12-2013, 08:03 PM #6New Member
- Join Date
- Feb 2013
- Posts
- 8
- Location
- Jordan/Elbridge, ny
- Tractor
- Looking to buy
Re: Trying to get a bearing on a used tractor
thanks! from the sounds of it I'm better off finding one with a loader on it.
-
02-12-2013, 09:43 PM #7Veteran Member
- Join Date
- Jan 2010
- Posts
- 1,280
- Location
- Piedmont, NC
- Tractor
- Kubota L4610 & BX2230, Farmall Super M, Super A
Re: Trying to get a bearing on a used tractor
That could either be a smoking heck of a deal or a scam or there is something wrong with the tractor. There must be $5,000 worth of attachments that are included in that tractor deal for $9,000, if I'm reading the ad correctly. The tractor alone should be worth $9,000, or something close to it. If it's any good, it would be cheaper for you to add the loader since you wouldn't need to buy anything else. The ad doesn't say anything about the condition of the tractor. Just on the chance the tractor and everything else is in good condition, it might be worth a phone call.
-
02-13-2013, 07:54 PM #8
-
02-13-2013, 09:10 PM #9Super Member
- Join Date
- Feb 2008
- Posts
- 7,733
- Location
- somewhere usa
- Tractor
- stuff
Re: Trying to get a bearing on a used tractor
Might be a scam but might not. I wouldn't jump to conclusions and think it is worth checking out. That is if you need the attachments that are listed with the tractor. Just guessing but if the tractor was built in the early 90's and has the 1700 hours which sounds about right it might be a good deal for you. If it were close to me I would check it out.
Similar Threads
-
Pilot Bearing And Release Bearing On A Ford 3000
By Shepp in forum New Holland Owning/OperatingReplies: 5Last Post: 09-16-2012, 11:34 PM -
i thank its a bearing
By MITCHCOBLE in forum Case-IHReplies: 4Last Post: 06-12-2011, 01:41 AM -
sealed bearing are grey iron bearing disc harrow
By little kubota in forum AttachmentsReplies: 3Last Post: 07-22-2010, 09:08 AM -
Bearing Housing
By msmsupr in forum Parts/RepairsReplies: 0Last Post: 09-21-2009, 06:05 PM -
Bearing
By Trainer in forum Owning/OperatingReplies: 14Last Post: 03-08-2007, 08:42 PM


Reply With Quote

