Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 43
  1. #31
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,870
    Location
    Washington NC (Inner Banks)
    Tractor
    Kubota L5740, Gravely 8199G

    Default Re: Finally Took Delivery of our Case Farmall 95

    Nice to see red and green living together in harmony.
    And very festive at Christmas...
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, LP RCR60 & RCF2084 mowers, LP 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mowers, Swisher 44 rough cut mower,, Echo 450-18 & 600-24, Echo PPT280, 2014 JD X750 diesel garden tractor, 1968 Cub Cadet 125 under renovation, Husky-Speeco 35 ton splitter, DR tow behind string trimmer

  2. #32
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,870
    Location
    Washington NC (Inner Banks)
    Tractor
    Kubota L5740, Gravely 8199G

    Default Re: Finally Took Delivery of our Case Farmall 95

    It's get hot as hades in SC in July and August with around 95% humidity

    we lived in South Florida for three years and simply died in the summer. 95 and 95. As soon as you stepped out of your air conditioned home,
    you were hit with a wall of muggy heat, almost hard to breath. And I believe you might have some nasty biting bugs down there
    to add to your summertime misery. That cab will be your friend...
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, LP RCR60 & RCF2084 mowers, LP 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mowers, Swisher 44 rough cut mower,, Echo 450-18 & 600-24, Echo PPT280, 2014 JD X750 diesel garden tractor, 1968 Cub Cadet 125 under renovation, Husky-Speeco 35 ton splitter, DR tow behind string trimmer

  3. #33
    New Member
    Join Date
    Feb 2013
    Posts
    22
    Location
    TX
    Tractor
    None

    Default Re: Finally Took Delivery of our Case Farmall 95

    Quote Originally Posted by verdanthills View Post
    With shipping, it was $44.4K.

    My loader (735 loader) capacity is about 4,000 pounds max height at pivot pins. I don't need nearly this capacity. If I needed more, I would have purchased the 745 loader with about 5,000 pounds max height at pivot pins.
    So how are you liking the 95? I still haven't purchased the 75c yet, but I talked to the dealer today and he just got a 95 like yours on his lot. He wants me to come check it out. He is 8 miles from my property and his first qoute was a little more than yours. So I think I have some wiggle room. What did they charge you for delivery from GA.? If I remember correctly we have similar properties. How is the cab on the 95? Would you buy the 95 again and would you change anything?

    Thanks!

  4. #34
    Member
    Join Date
    Jan 2013
    Posts
    35
    Location
    Salem, OR
    Tractor
    Case IH Farmall 95

    Default Re: Finally Took Delivery of our Case Farmall 95

    Quote Originally Posted by jjswag View Post
    So how are you liking the 95? I still haven't purchased the 75c yet, but I talked to the dealer today and he just got a 95 like yours on his lot. He wants me to come check it out. He is 8 miles from my property and his first qoute was a little more than yours. So I think I have some wiggle room. What did they charge you for delivery from GA.? If I remember correctly we have similar properties. How is the cab on the 95? Would you buy the 95 again and would you change anything?

    Thanks!
    I haven't had a chance to use the tractor much. We mainly live in California and visit the farm every month or two. We will be back up to the farm for 2 weeks in April so I'll get to use the brush cutter. I'm going to get a heavy duty Woods cutter.

    The 95s are no longer being made so whatever supply is left will be it. I'm glad I got the cab; it gives you more flexibilty no matter what the weather is like.

    The price included delivery so I'm not sure exactly what delivery would have been. But it must be at least $1,500 to move the tractor from Georgia to Oregon for residential delivery (no loading dock at our farm).

  5. #35
    New Member Reeltruth's Avatar
    Join Date
    Aug 2012
    Posts
    15
    Location
    Sc
    Tractor
    Kubota MX 5100 Gear, L844 FEL, Land Pride 72' cutter, Bad Boy CZT 50

    Default Re: Finally Took Delivery of our Case Farmall 95

    Quote Originally Posted by verdanthills View Post
    I haven't had a chance to use the tractor much. We mainly live in California and visit the farm every month or two. We will be back up to the farm for 2 weeks in April so I'll get to use the brush cutter. I'm going to get a heavy duty Woods cutter.

    The 95s are no longer being made so whatever supply is left will be it. I'm glad I got the cab; it gives you more flexibilty no matter what the weather is like.

    The price included delivery so I'm not sure exactly what delivery would have been. But it must be at least $1,500 to move the tractor from Georgia to Oregon for residential delivery (no loading dock at our farm).
    Man Im glad to here you have had good luck with the boys at Haney in Rockmart GA! I just talked with them about a 95 open station with loader and cutter, I was very happy with everything!!! I am so ready to get rid of my kubota MX5100 and cutter so I can go ahead and purchase the 95 before they are all gone!!! By no means am I dissing Kubota because it is a great little tractor, it's just not going to be enough to grow with me... Anyone interested in a Kubota MX5100 with loader and 6 foot cutter?
    Thank You Jesus!!! John 3:16-17

  6. #36
    New Member Reeltruth's Avatar
    Join Date
    Aug 2012
    Posts
    15
    Location
    Sc
    Tractor
    Kubota MX 5100 Gear, L844 FEL, Land Pride 72' cutter, Bad Boy CZT 50

    Default Re: Finally Took Delivery of our Case Farmall 95

    Quote Originally Posted by PMA View Post
    I purchased a CI Farmall 85U in 2011 and have enjoyed it. I used mine mostly for cutting and baling hay. We have a great dealership in South Carolina. Use to purchase JD but the dealership in my area is not the best. Glad I went red. Purchased a RB 454 silage baler last year from CI dealer. I am all in for red. You will enjoy that tractor.

    Sent from my iPhone using TractorByNet
    Nice!!! If you don't mind me asking what dealer are you speaking of here in SC?
    Thank You Jesus!!! John 3:16-17

  7. #37
    New Member
    Join Date
    Feb 2013
    Posts
    6
    Location
    Keller,Texas
    Tractor
    2012 Case IH 75C

    Default Re: Finally Took Delivery of our Case Farmall 95

    I just purchased a new 75C from Hendershot Tractor in Decatur,Tx near where i live...8X8 Hydraulic Shuttle, Instructional Seat, Air Suspension Seat and Rear Remote 3 point linkage adjuster.. L670 Loader and 2 Remote Outlets ( 4 valves )...I paid $42,500 and got 0 % for 72 months..I will let you know how it goes.I looked very hard at all the other competitors and i just couldn't beat the price...Plus my dealer is a great place..Always very friendly and bends over backwards to help you..

  8. #38
    New Member Reeltruth's Avatar
    Join Date
    Aug 2012
    Posts
    15
    Location
    Sc
    Tractor
    Kubota MX 5100 Gear, L844 FEL, Land Pride 72' cutter, Bad Boy CZT 50

    Default Re: Finally Took Delivery of our Case Farmall 95

    Quote Originally Posted by Reeltruth View Post
    Man Im glad to here you have had good luck with the boys at Haney in Rockmart GA! I just talked with them about a 95 open station with loader and cutter, I was very happy with everything!!! I am so ready to get rid of my kubota MX5100 and cutter so I can go ahead and purchase the 95 before they are all gone!!! By no means am I dissing Kubota because it is a great little tractor, it's just not going to be enough to grow with me... Anyone interested in a Kubota MX5100 with loader and 6 foot cutter?
    Well I haven't got rid of my Kubota yet, but I did go ahead and purchase the 95 Farmall. It's an open station with 12x12 shuttle, 2 remotes and 735 loader. I can't wait for it to be delivered!!! I am also purchasing a Rhino Turbo 96 cutter with it. I hope I will already have a couple jobs lined up for it when it gets here....gotta pay for it some how...lol Including the cutter the price was 39,800. Haney Farm and Ranch is an awesome dealership!!! Will post picks of the beast when it arrives!
    Thank You Jesus!!! John 3:16-17

  9. #39
    Veteran Member PMA's Avatar
    Join Date
    Jul 2008
    Posts
    1,152
    Location
    South Carolina
    Tractor
    John Deere 5325, CI Farmall 85U, Mccormick International 404

    Default

    The dealer I bought from is Stucky Brothers near Hemingway SC. They merged with Dillon Tractor Co. And now one in Bishopville and Orangeburg Sc

    Sent from my iPhone using TractorByNet

  10. #40
    Veteran Member wmonroe's Avatar
    Join Date
    Nov 2005
    Posts
    2,382
    Location
    Southwestern, PA
    Tractor
    1958 Ford 961 Powermaster

    Default

    Verdanthills - enjoy the new tractor, it looks like it should provide years of work.
    Kubota L5240 with loader and backhoe

    1958 Ford 961 Powermaster LP

Page 4 of 5 FirstFirst 12345 LastLast

Similar Threads

  1. Case IH Farmall 31...can't find anything about it
    By Radiater in forum Buying/Pricing/Comparisons
    Replies: 2
    Last Post: 05-05-2011, 10:31 AM
  2. Finally Here - Farmall 45
    By jk96 in forum Case-IH
    Replies: 9
    Last Post: 04-02-2008, 11:23 PM
  3. Delivery Day Tomorrow -- Finally!!
    By Tarheelman in forum New Holland Buying/Pricing
    Replies: 21
    Last Post: 12-04-2005, 11:14 AM
  4. Delivery day finally!
    By ccdck20hst in forum Kioti Owning/Operating
    Replies: 8
    Last Post: 05-24-2004, 04:46 AM
  5. Finally my turn for delivery!
    By prosperity in forum John Deere Buying/Pricing
    Replies: 7
    Last Post: 04-29-2003, 08:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.