Page 1 of 8 1234 ... LastLast
Results 1 to 10 of 72
  1. #1
    Elite Member Piston's Avatar
    Join Date
    Sep 2008
    Posts
    2,760
    Location
    Central MA, Lakes Region NH
    Tractor
    Kubota L4610 and John Deere 410

    Default If it weren't for TBN, which implements would you NOT have bought?

    This forum, more so than any other forum, really has a way of spending peoples money

    If it weren't for TBN, I wouldn't have half the implements I do.

    Which implements or attachments have you purchased (or made) that you never would have bought if it weren't for here? And, how useful has it been?

    For me, I didn't know what some implements even were, or that they even existed for tractors. After seeing them on here, I just had to have them all of a sudden!

    My most unknown implement, was the FEL grapple, and good god I'm glad I bought that! Now, I couldn't live without it!

    Anyone else find something you didn't know existed?
    Kubota L4610 and John Deere 410 - WR Long 64" Grapple (best attachment ever!) QA front forks, rear forks, Brown 472 HD Rotary Mower, Land Pride RBT4096 hydro blade, Woods 7200 Power Rake, homemade 3 pt log splitter, Land Pride rake/blade combo, Land Pride HRL 3578 box blade (Hydro scarifiers), Shaver SC50 3 pt. Stumpgrinder, FitRiteHydraulics TnT, 6" Vermeer PTO Chipper (Hydro feed), Disc Plow, Ratchet Rake, LP HD25 Hydraulic PHD, Woodmizer LT15 portable sawmill
    Rear Remotes Install

  2. #2
    Super Star Member k0ua's Avatar
    Join Date
    Jun 2009
    Posts
    15,704
    Location
    Branson, Mo.
    Tractor
    Kioti DK35se Hydrostat

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    Same here, I did not know you could have a grapple for a tractor, I saw them on skid steers, but I did not have enough knowledge to know about hydraulics, or anything like that.. I have learned about all of it here, and then did research on the net.. You have to know about something before you can even go looking for knowledge. I saw what other guys were doing with them, and said "well heck, I need one of those!" It has been handy.
    James KUA

    Kioti DK35se hydrostat with 2 QA buckets, 48 inch. King Kutter Rotary Cutter. 750 lbs ballast box. Loaded tires, Construction Attachments SSQA Lightweight Pallet forks. EA 50 inch single lid "wicked" Grapple. Satisfied Everlast PA160 welder owner How to add a link to a post . Best way to search TBN


  3. #3
    Silver Member
    Join Date
    Aug 2013
    Posts
    168
    Location
    Lawrenceburg Ky, Huntsville Alabama
    Tractor
    Ford Dexta, Branson 6530c Yanmar Lx490 Power reverser

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    Grapple. Wound up with NAI 48" Long story about what I wanted versus what I could get my hands on. After all said and done I learned on here that the NAI would do the job. So after several attempts at to purchase some of the more "capable" I ran up on the NAI and could get it when I needed it. It did not disappoint and saved a bunch of money. Now I can buy other TBN temptations

    Grappling has made major impact. I don't worry about what I cut down now. Yesterday I chain sawed for about 2 hour on an old fence row and rested from that workout by cleaning the whole thing to a burn pile in an hour. This included over 15 tall 40 year old trees and all the smaller stuff including grape vines, honey suckle and every other kind of thing that will take hold in a untended fence line. I now have some stumps to deal with but I have figured that problem out from a previous recovering of the space around an old barn that had a bunch of trees. Did not have the grapple for that job so that gave me the incentive to bite on the stuff I read here about grapples. Without the grapple the fence line would never have been cleared on my watch.



    Did not know about grapple until TBN
    Last edited by Raised on a Deere; 08-08-2014 at 09:32 AM.

  4. #4
    Veteran Member Deere Dude's Avatar
    Join Date
    Feb 2011
    Posts
    1,121
    Location
    Hee Haw He!!, TN
    Tractor
    John Deere 3720

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    Forks.
    I never thought of them before, but it my case and how I make wood and just uses around the ranch, I would have a difficult time living without it.
    JD 3720 with R4s
    X740

  5. #5
    Silver Member
    Join Date
    Aug 2013
    Posts
    168
    Location
    Lawrenceburg Ky, Huntsville Alabama
    Tractor
    Ford Dexta, Branson 6530c Yanmar Lx490 Power reverser

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    Bought the piranha bar. Turned my bucket into a monster. Read about it here.

    Also jumped on a rock rake that was part of a rear blade deal. I would have not been interested in it until reading here. Havent used the rake yet ut it is about to be called on in a barn lot preparation for shed build. Reading about box blades has me in the market.
    Last edited by Raised on a Deere; 08-08-2014 at 09:13 AM. Reason: spelling :)

  6. #6
    Veteran Member workinallthetime's Avatar
    Join Date
    Nov 2006
    Posts
    1,043
    Location
    Tulsa, ok
    Tractor
    b3030 TLB,zd326

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    toothbar - sounded like something the dentist used, built it loved it modified it to fit every tractor since. useless implements? i cant find enough change in the couch to waste on anything useless.
    equipment = L45 tlb, zd326p
    attachements = disk, pallet forks, box blade, 4n1, thumb, ld material bucket
    past equipment = b???? old slow no p/s, bx23 tlb, b3030 tlb, mf 175, jd301a

  7. #7
    Platinum Member Monster5601's Avatar
    Join Date
    May 2010
    Posts
    516
    Location
    Oakland, MI
    Tractor
    Kubota B3030 R4 Tires

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    Land plane and Ratchet Rack. And I would like a FEL grapple but have yet to find one that will fit the kubota quick connect on my LA403 loader.
    Bob, n8zcc

    Kubota B3030 with R4s
    LA403, 60" bucket with hooks, bolt-on tooth bar, ratchet rake
    BH76 with 16" bucket and thumb
    Kubota Pallet Folks
    Bush Hog 35-06 72" Rear Blade
    Bush Hog SBX60 Box Blade
    Bush Hog Razorback RZ160
    Kubota ZD323-60
    Kubota RTV900 with Curtis hydraulic angle plow

  8. #8
    Elite Member newbury's Avatar
    Join Date
    Jan 2009
    Posts
    4,923
    Location
    From Vt, in Va, retiring to MS
    Tractor
    Kubota's - B7610, M4700

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    From the tractor out.

    I've relied on the community mind of TBN for advice on all.
    My rides - '95 Kubota M4700 w/ PEC, LA1001 FEL :'07 B7610, LA352 FEL, Bush Hog SBX 48 box blade, '09 Woods BH70-X w/ 16" bucket and thumb, 3pt pallet forks, Dale Phillips PHD, Jinma 8" chipper, 2 Piranha's, Winco 12KW PTO generator, Howse plow, 5' KK tiller, 5' Big Bee cutter, with a 2002 7.3L Ford F350 CC DRW 4x4 and '07 18' Hudson HSE Deluxe trailer - 5 Ton to haul it all

  9. #9
    Super Star Member RoyJackson's Avatar
    Join Date
    Nov 2001
    Posts
    18,863
    Location
    Bethel, Vermont
    Tractor
    John Deere 4400 MFWD, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    None, actually...

    I bought the implements I need and use. I do read others' comments and threads on various brands for information and experiences. However, I almost always buy used equipment, so the final decision is based upon cost, location and condition.
    Roy Jackson

    "Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one."
    -Joseph P. Martino

  10. #10
    Elite Member Baby Grand's Avatar
    Join Date
    Nov 2007
    Posts
    3,815
    Location
    Windsor, CT.
    Tractor
    Kubotas: L3240GST B2320HST B5100D & G5200H

    Default Re: If it weren't for TBN, which implements would you NOT have bought?

    My KKII tiller. I never would have taken anything with "Kutter" in the name seriously.
    Comments from Farmwithjunk and others convinced me. It's been a great value.
    That's the problem with trouble.
    It always starts out as such fun."
    - Randall Brown

Page 1 of 8 1234 ... LastLast

Similar Threads

  1. Tractor Sizing Already bought but have question about size and implements
    By klemhoneycutt in forum Buying/Pricing/Comparisons
    Replies: 0
    Last Post: 03-13-2014, 12:47 PM
  2. Replies: 4
    Last Post: 07-01-2012, 03:07 PM
  3. Has anyone bought any Massey Ferguson Implements ?
    By ShannonCole888 in forum Massey Ferguson Buying/Pricing
    Replies: 5
    Last Post: 05-20-2011, 06:09 PM
  4. Bought -- 2007 L5740 HST Plus with implements
    By ecoslik in forum Kubota Buying/Pricing
    Replies: 11
    Last Post: 08-12-2010, 01:29 AM
  5. Implements You Wish You Hadn't Bought
    By Oleozz in forum Attachments
    Replies: 58
    Last Post: 05-30-2007, 09:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.