Results 1 to 4 of 4
  1. #1

    Default JX95

    Looking to purchase a new tractor around 90 horse. Looking at a JX95 or TD95(New Holland equivalent). Only need 2wd since not using a loader. The biggest piece of equipment I have that I want to use it for is pulling an Vermeer 604M round baler. Technically the tractor is rated to handle the baler based on horsepower but my question or concern is that the baler will push the tractor around because of its wieght (7000 lbs empty). Want to buy new and my budget is around 30k. Does anyone know if this tractor can handle that baler?

  2. #2
    Veteran Member RollingsFarms's Avatar
    Join Date
    Mar 2007
    Posts
    1,667
    Location
    South Carolina
    Tractor
    John Deere 5325 & John Deere 910A 22hp Kawasaki/54" deck

    Default Re: JX95

    Quote Originally Posted by shadowbud
    Looking to purchase a new tractor around 90 horse. Looking at a JX95 or TD95(New Holland equivalent). Only need 2wd since not using a loader. The biggest piece of equipment I have that I want to use it for is pulling an Vermeer 604M round baler. Technically the tractor is rated to handle the baler based on horsepower but my question or concern is that the baler will push the tractor around because of its wieght (7000 lbs empty). Want to buy new and my budget is around 30k. Does anyone know if this tractor can handle that baler?
    have you considered a JD 5603? 99hp with a cab and would fit your budget and spare you a few thousand $$$. the other two tractors you mentioned should do your work fine though, the CNH are generally heavier then most brands. your baler shouldnt push either tractor around i wouldnt think though.

  3. #3
    Member
    Join Date
    Mar 2006
    Posts
    46
    Location
    S. Illinois
    Tractor
    New Holland TC40

    Default Re: JX95

    I used to us an IH 706 on a New Holland round baler. It was less hp, but about the same weight. I would recommend getting the tires loaded. That will sure help alot.
    Good luck in your purchase.

  4. #4
    Veteran Member daTeacha's Avatar
    Join Date
    Oct 2005
    Posts
    2,352
    Location
    Funk, Ohio

    Default Re: JX95

    What do the dealers in your area think? Will any of them let you try their machine on your ground with your baler behind it? For $30K they should be willing to let you test it out before buying. Besides, they should know that once the shiny new tractor is on your land, you'll be reluctant to send it back.
    Rich
    300 hours on the DX29, 850 on the JD 240 and too many to count on the Cadet
    Funk, Ohio

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.