Results 1 to 5 of 5
  1. #1
    Silver Member
    Join Date
    Mar 2007
    Posts
    150
    Location
    Hempstead, TX
    Tractor
    Case DX55

    Default DX55 Owners...Can you check your manual for me?

    Since i have some obvious typos in mine, i would like to know what the adjustments are on the inching pedal cable adjustment (section 3-30, 3-31) and the Clutch pedal adjustment (section 3.32)

    For inching pedal cable adjustment i have

    2.95" to take slack out of cable

    and .20" for total cable travel



    For CLutch pedal adjustment i have:

    Free travel should be 3/4-1-3/16"


    Also, WTH is the difference between inching pedal and clutch?

  2. #2
    Veteran Member
    Join Date
    Sep 2005
    Posts
    1,348
    Location
    Ohio
    Tractor
    Case DX55, Ford 850

    Default Re: DX55 Owners...Can you check your manual for me?

    I scanned the Inching Pedal adjustment page from my manual. It is the 2007 manual for DX55 and DX60.
    The Clutch adjustments in my manual are the same as you listed. They do not apply to the EHSS models, but they are for the regular gear shift SSS models.
    Attached Files Attached Files

  3. #3
    Silver Member
    Join Date
    Mar 2007
    Posts
    150
    Location
    Hempstead, TX
    Tractor
    Case DX55

    Default Re: DX55 Owners...Can you check your manual for me?

    Thank you very much....

    I never got the terminology down correctly. Do i have a clutch or an inching pedal? My DX55 has 4 gears on the right, forward/reverse on teh left that require use of the clutch, and then L/M/H on the side of the seat.

    I think that means i have an SSS, so does that mean the inching pedal adjustment does not apply to me?

  4. #4
    Veteran Member
    Join Date
    Sep 2005
    Posts
    1,348
    Location
    Ohio
    Tractor
    Case DX55, Ford 850

    Default Re: DX55 Owners...Can you check your manual for me?

    Mine is EHSS and is exactly as you described, EXCEPT: no clutching is needed to go from forward to reverse. The inching pedal takes the place of the clutch (similar funtion - different name) for inching in to attach equipment etc, but otherwise it isn't needed to start/stop/reverse. If yours is a SSS, you will see a rod linked below the clutch, forward to the left side of the tractor. The EHSS has a small cable that runs from the lower clutch pedal up under the left side panel of the steering column.

  5. #5
    Silver Member
    Join Date
    Mar 2007
    Posts
    150
    Location
    Hempstead, TX
    Tractor
    Case DX55

    Default Re: DX55 Owners...Can you check your manual for me?

    OK, yeah, i have to clutch to go from forward to reverse.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.