Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Mar 2011
    Internation 1466

    Default Need Help With Power Steering on 73-74 IH 1066

    Hello my name is trent and I Have a power steering leak inside my column on my 1973 or 74 International 1066. I can see the two lines going up into the column and I know one is leaking. i just recently replaced one of the lower lines by the radiator on my 856 and it was not a fun job to pull the new line into where it needed to be. I was just wondering if anyone has pulled apart the steering column on one of these machines and could maybe tell me how to go about doing something like this? thank you

  2. #2
    New Member
    Join Date
    Apr 2011

    Default Re: Need Help With Power Steering on 73-74 IH 1066

    is it just a hose or is it the steering pump itself. We had a steel hose rub into. We replaced with a rubber hose. It wasn't too bad. Our steering pump is leaking. Replaced orings, but it didn't last long. Tedious job.

  3. #3
    Join Date
    Apr 2011
    Case-IH 5240

    Default Re: Need Help With Power Steering on 73-74 IH 1066

    Your 1066 has 4 lines on the steering valve, you can remove the sheet metal cover in front of the steering wheel to kinda see the lines. Finding he leak is the first step in repairing the leak.
    Remove the steering wheel, upper instrument panel (just the mounting bolts and 'swing' it out of the way), disconnect the throttle lever, and hydraulic lines ..then remove the steering valve from the top of the column.
    You or your dealer should 'reseal' the steering valve, there is a boot, top seal kit, and Orings to replace ..there are some small parts inside the steering valve and timing procedures that must be followed.

    May be best to remove the steering valve and take it to your dealer. Re sealing is not complicated, if you know what your doing, and should take less than one hour.
    If it's stuck ...force it, if it breaks needed a new one anyway

Similar Threads

  1. Replies: 3
    Last Post: 09-08-2012, 09:22 PM
  2. '97 F350 power steering overflows, doesn't work
    By texasjohn in forum Trailers & Transportation
    Replies: 7
    Last Post: 11-03-2009, 02:43 PM
  3. Ford 800 power steering
    By tree grower in forum New Holland Owning/Operating
    Replies: 3
    Last Post: 10-11-2009, 06:43 AM
  4. Steering revisited Jinma 254
    By Dadsgreenpsd in forum Chinese Tractors
    Replies: 3
    Last Post: 09-16-2009, 06:30 AM
  5. Power steering conversion questions
    By Kernopelli in forum Hydraulics
    Replies: 11
    Last Post: 10-24-2008, 12:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.