Results 1 to 2 of 2
04-28-2011, 01:59 PM #1
- Join Date
- Apr 2011
- Case 530
Case backhoe boom won't stay up
I have a Case 530 loader backhoe. The loader cylinders hemorrhage when the tractor is running. I can raise the loader and turn the tractor off and it doesn't leak down. It will stay up. The backhoe has some leaks too but if I raise the boom it will immediately start dropping back down. I have zero experience on troubleshooting hydraulics. Anyone have a "most likely" guess what is happening? Thanks!
04-28-2011, 02:27 PM #2
Re: Case backhoe boom won't stay up
The load check valves in your FEL control valve are bypassing/worn/cocked in the seats or nonexistant...
Some FEL controls do not have "Load Checks" and this would require replacing the control valve with load checks built-in......if the problem just started then you have debris under one of those check valves and it's not seating.....
Hope this helps....2010 Kubota B2320 FEL & BH65
If it ain't fixed don't broke it!
By vintovka in forum Kubota Owning/OperatingReplies: 7Last Post: 05-23-2010, 02:06 PM
Backhoe Case D100 Backhoe SpecsBy EaTmYtAiLpIpEs in forum Case-IHReplies: 1Last Post: 06-26-2008, 11:10 AM
By joecdeere in forum John Deere Buying/PricingReplies: 0Last Post: 05-08-2002, 10:34 PM