Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Veteran Member
    Join Date
    Jun 2003
    Posts
    1,649
    Location
    Northern, New York
    Tractor
    Kubota L3830 03: RTV 900

    Default IH 584 hydraulics

    Gentlemen I have done seaches on Google until I am almost blind looking for a pic of a power beyond plate for a IH 584. Could someone please post a pic of one. I just got a new to me 584 and the loader is plumbing thru the rear remotes there-by rendering them almost useless. Afte many searchs on google I find there is this power beyond plate I can use instead of the remotes. There is a plate on the side of the remotes that has one outlet in it that will flow hyd oil. It this the PB plate?
    M-5040 w/cab, 05 RTV 900, Where the maple sap flows

  2. #2
    Platinum Member
    Join Date
    Apr 2011
    Posts
    738
    Tractor
    cx70,5510,4630,5005

    Default Re: IH 584 hydraulics

    i put one on a 684 international ,about 20 years ago.if i remember correctly it bolts on the side of the valves.it is just a plate with a hole in it .the plate i took off did not have any holes in it. i can not remember if the return was in the plate or somewhere else.

  3. #3
    Veteran Member
    Join Date
    Jun 2003
    Posts
    1,649
    Location
    Northern, New York
    Tractor
    Kubota L3830 03: RTV 900

    Default Re: IH 584 hydraulics

    Quote Originally Posted by cowski View Post
    i put one on a 684 international ,about 20 years ago.if i remember correctly it bolts on the side of the valves.it is just a plate with a hole in it .the plate i took off did not have any holes in it. i can not remember if the return was in the plate or somewhere else.
    Thank you sir that bit of info its a big help
    Last edited by Deerlope; 12-18-2011 at 10:09 AM.
    M-5040 w/cab, 05 RTV 900, Where the maple sap flows

  4. #4
    Veteran Member
    Join Date
    Jan 2009
    Posts
    2,247
    Location
    Carroll, Ohio
    Tractor
    Massey 180 Diesel

    Default Re: IH 584 hydraulics

    I've attached a picture of the Power Beyond block, or cover as they call it on the CASE/IH parts page.

    Here is the part number they give for the kit. 114566C91

    Copy and past the part number to a search engine such as Google, or go directly to Messicks, that advertises on here, and do a search on the part number. Messicks shows it still available, and cost shown as like $304.00.

    If you want to look for a used one, go to TractorHouse:Used Tractors For Sale at TractorHouse.com: John Deere Tractors, used farm tractors and farm equipment, tractors for sale, Case IH, New Holland, Agco, kubota, and you can place a parts search request. You will see it in the menu at the top left, in red. You will have to register with them with contact info.

    You usually get a response from salvage yards, either by email, or phone call within 36 to 48 hours. Although it may be a little slow this week, and/or next.

    Hope this helps..!!
    Attached Thumbnails Attached Thumbnails -584-power-beyond-kit-gif  

  5. #5
    Veteran Member
    Join Date
    Jan 2009
    Posts
    2,247
    Location
    Carroll, Ohio
    Tractor
    Massey 180 Diesel

    Default Re: IH 584 hydraulics

    Here is the part number, that replaced the number I posted above. 123082C2

    If you Google this number, you'll get like 180 hits, on listings and discussions on this PB cover, from other forums, etc...

  6. #6
    Veteran Member
    Join Date
    Jun 2003
    Posts
    1,649
    Location
    Northern, New York
    Tractor
    Kubota L3830 03: RTV 900

    Default Re: IH 584 hydraulics

    Quote Originally Posted by DJ54 View Post
    I've attached a picture of the Power Beyond block, or cover as they call it on the CASE/IH parts page.

    Here is the part number they give for the kit. 114566C91

    Copy and past the part number to a search engine such as Google, or go directly to Messicks, that advertises on here, and do a search on the part number. Messicks shows it still available, and cost shown as like $304.00.

    If you want to look for a used one, go to TractorHouse:Used Tractors For Sale at TractorHouse.com: John Deere Tractors, used farm tractors and farm equipment, tractors for sale, Case IH, New Holland, Agco, kubota, and you can place a parts search request. You will see it in the menu at the top left, in red. You will have to register with them with contact info.

    You usually get a response from salvage yards, either by email, or phone call within 36 to 48 hours. Although it may be a little slow this week, and/or next.

    Hope this helps..!!


    The plate on the side of my looks very much like the pic except mine is round, is held on with 4 bolts. For a return I thought I might just hook into the transmission fill pipe.
    M-5040 w/cab, 05 RTV 900, Where the maple sap flows

  7. #7
    Veteran Member
    Join Date
    Jun 2003
    Posts
    1,649
    Location
    Northern, New York
    Tractor
    Kubota L3830 03: RTV 900

    Default Re: IH 584 hydraulics

    Well what I thought was a PB plate is not. I hooked to loader up and nothing moved. So I will remove the plate and take it to my dealer and ask him what it is, if it not a PB plate.
    M-5040 w/cab, 05 RTV 900, Where the maple sap flows

  8. #8
    Veteran Member
    Join Date
    Jan 2009
    Posts
    2,247
    Location
    Carroll, Ohio
    Tractor
    Massey 180 Diesel

    Default Re: IH 584 hydraulics

    On my 656, I have to lock the one remote handle in the detente position (forward on mine) to get fluid to the power beyond outlet.

  9. #9
    Veteran Member
    Join Date
    Jun 2003
    Posts
    1,649
    Location
    Northern, New York
    Tractor
    Kubota L3830 03: RTV 900

    Default Re: IH 584 hydraulics

    I don't know what the answer is right now but for the time being I will have to hook it(loader) back into the rear remotes DARN.There is so little info still left out there about these tractors. It would be ashame to scrap this one because all it ever did was scrap out a freestall barn. The cow manure wore out one bucket so it now has an almost wore out 5-1/2' footer on it. Soon to be a used 6" JD. Thank you for your help and at some point I will get this figured out. Then I will try to find this post and let you know how I made out.
    M-5040 w/cab, 05 RTV 900, Where the maple sap flows

  10. #10
    New Member
    Join Date
    Dec 2011
    Posts
    2
    Tractor
    Farmall 656

    Default Re: IH 584 hydraulics

    I think the parts illustration is inaccurate. Conceptually it is fine. Typical of a parts book.
    check out this item on ebay: USED INTERNATIONAL 74/84/85 SERIES 4 BOLT POWER BEYOND | eBay

    We have classic Farmalls and a 685 CIH which is a newer generation of the same thing but it uses different hydraulic valve design. I don't have the experience with those 84 series and older Doncaster models that I wish I did, but I think the difference is that the factory plate has two holes in it and the power beyond loader plate has just one. The factory plate returns the remotes in neutral back through the casting to the reservoir, and the power beyond plate sends that flow to the external valve and then to the reservoir. You could probably modify your current plate to plug the unnecessary hole--an allen pipe plug perhaps?
    hope the ebay pic helps.

    karl f

Page 1 of 3 123 LastLast

Similar Threads

  1. Ford 1710 rear hydraulics slow/not working
    By Minorhero in forum Hydraulics
    Replies: 26
    Last Post: 03-28-2010, 12:56 AM
  2. Mahindra 4005 Hydraulics
    By dnetherland in forum Hydraulics
    Replies: 7
    Last Post: 02-22-2010, 01:28 PM
  3. Shibaura D23 hydraulics jerky
    By Katydave in forum Hydraulics
    Replies: 1
    Last Post: 11-23-2009, 10:16 AM
  4. FEL Hydraulics
    By Bob Ha in forum Hydraulics
    Replies: 6
    Last Post: 10-26-2009, 10:12 PM
  5. Help with Hydraulics
    By Anonymous Poster in forum Projects
    Replies: 34
    Last Post: 04-08-2003, 08:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.